Fiat 540 V/E or Massey Ferguson MF 360 (A)?

Which should you choose?

The figures split: the Fiat 540 V/E is ahead on hydraulic flow; the Massey Ferguson MF 360 (A) is ahead on three-point lift, top speed and drive.

  • The Massey Ferguson MF 360 (A) suits heavy draft work (ploughing, cultivating) better on this data: 45% (724 kg / 1,596 lb) heavier and four-wheel drive.
  • The Massey Ferguson MF 360 (A) suits road haulage better on this data: 50% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 540 V/E and Massey Ferguson MF 360 (A), with the call on each
Question540 V/EMF 360 (A)Call
Which puts more power through the PTO shaft?33.3 kW (44.7 hp)Traktorenlexikon, “Fiat 540 V/E”33.4 kW (44.8 hp)Traktorenlexikon, “Massey Ferguson MF 360”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 540 V/E and the MF 360 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 540 V/E and the MF 360 (A).
Which pumps more oil for implements?21.8 L/min (5.8 gpm)Traktorenlexikon, “Fiat 540 V/E”18.9 L/min (5.0 gpm)Traktorenlexikon, “Massey Ferguson MF 360”AheadThe Fiat 540 V/E has 15% more hydraulic flow (2.9 L/min / 0.8 gpm) than the Massey Ferguson MF 360 (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,620 kg (3,571 lb)Traktorenlexikon, “Fiat 540 V/E”1,930 kg (4,255 lb)Traktorenlexikon, “Massey Ferguson MF 360”AheadThe Massey Ferguson MF 360 (A) has 19% more lift (310 kg / 683 lb) than the Fiat 540 V/E (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?1,600 kg (3,527 lb)Traktorenlexikon, “Fiat 540 V/E”2,324 kg (5,124 lb)Traktorenlexikon, “Massey Ferguson MF 360”Ahead (a fact, not an advantage)The Massey Ferguson MF 360 (A) is 45% heavier (724 kg / 1,596 lb) than the Fiat 540 V/E (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 540 V/E and the MF 360 (A).
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Fiat 540 V/E”8 to 12Traktorenlexikon, “Massey Ferguson MF 360”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 540 V/E and the MF 360 (A).
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Fiat 540 V/E”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 360”AheadThe Massey Ferguson MF 360 (A) has 50% more top speed (10.0 km/h / 6.2 mph) than the Fiat 540 V/E (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Fiat 540 V/E”540 rpmTraktorenlexikon, “Massey Ferguson MF 360”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 540 V/E”independentTraktorenlexikon, “Massey Ferguson MF 360”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Fiat 540 V/E”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 360”AheadThe Massey Ferguson MF 360 (A) is available with four-wheel drive; the Fiat 540 V/E is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1973–19821987–1994Ahead (a fact, not an advantage)The Massey Ferguson MF 360 (A) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 540 V/E has 15% more hydraulic flow (2.9 L/min / 0.8 gpm) than the Massey Ferguson MF 360 (A) (both pump flow, as stated by the source).
  • The Massey Ferguson MF 360 (A) has 19% more lift (310 kg / 683 lb) than the Fiat 540 V/E (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 360 (A) is 45% heavier (724 kg / 1,596 lb) than the Fiat 540 V/E (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 360 (A) has 50% more top speed (10.0 km/h / 6.2 mph) than the Fiat 540 V/E (both top speed forward, as stated by the source).
  • The Massey Ferguson MF 360 (A) is available with four-wheel drive; the Fiat 540 V/E is two-wheel drive (as stated by the sources).
  • The Massey Ferguson MF 360 (A) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources