10 material differences · fewer than 12
Tractor oneFiat 50-R1958–1959No measured PTO figureTractor twoPorsche-Diesel Master 4091962–1963No measured PTO figure
Which should you choose?
Read our verdict on the 50-R and the Master 409 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 50-R | Master 409 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.3 hp | — |
| Engine declared | O.M.-FIAT CO 1D-50/Var. 10 | Porsche-Diesel F 409 | differs |
| Displacement declared | 4.16 L | 3.50 L | +19% 50-R |
| Maximum torque declared | 177 lb·ft · 240 N·m | — | — |
| Transmission | |||
| Top speed declared | 14.3 mph · 23 km/h | 12.1 mph · 19.5 km/h | +18% 50-R |
| Clutch declared | pedal-operated dry single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | 6.6 gpm · 25 L/min | +25% Master 409 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 5,677 lb · 2,575 kg | +12% Master 409 |
| Wheelbase declared | 74.8 in · 1,900 mm | 97.0 in · 2,465 mm | +30% Master 409 |
| Length declared | 125.2 in · 3,180 mm | 143.7 in · 3,650 mm | +15% Master 409 |
| Width declared | 60.4–91.9 in · 1,535–2,335 mm | 73.4 in · 1,865 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 17.2 in · 437 mm | +9% Master 409 |
| Turning radius, braked declared | 10.8 ft · 3.30 m | — | — |
| Fuel tank declared | 53.9 qt · 51.0 L | 63.4 qt · 60 L | +18% Master 409 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 50-R sources
- Source: Traktorenlexikon, “Fiat 50 R”
Porsche-Diesel Master 409 sources
- Source: Traktorenlexikon, “Porsche-Diesel Master 409”