Fiat 50-66 S (DT) vs Hürlimann XE 55 Tradition

9 material differences · fewer than 12

Tractor one

1992–1995

No measured PTO figure

Tractor two

2005–2009

No measured PTO figure

Which should you choose?

Read our verdict on the 50-66 S (DT) and the XE 55 Tradition → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 50-66 S (DT) and Hürlimann XE 55 Tradition, field by field
Field	50-66 S (DT)	XE 55 Tradition	Gap
Engine
Engine power, claimed claimed	49.3 hp	51.2 hp	—
Engine declared	FIAT-IVECO 8035.06	SAME-DEUTZ-FAHR 1000.3 W (EURO-II)	differs
Displacement declared	2.71 L	3.00 L	+11% XE 55 Tradition
Maximum torque declared	130 lb·ft · 176 N·m	151 lb·ft · 205 N·m	+16% XE 55 Tradition
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal operated dry single disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	9.1 gpm · 34.5 L/min	—	—
Pressure declared	3,118 psi · 215 bar	3,046 psi · 210 bar	—
Three-point lift at ends declared	4,685 lb · 2,125 kg	6,614 lb · 3,000 kg	+41% XE 55 Tradition
Rear PTO speeds declared	540 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	4,685 lb · 2,125 kg	4,806 lb · 2,180 kg	—
Maximum permissible mass declared	8,488 lb · 3,850 kg	—	—
Wheelbase declared	78.7 in · 1,999 mm	75.8 in · 1,925 mm	—
Length declared	127.6 in · 3,241 mm	121.5 in · 3,085 mm	—
Width declared	60.6 in · 1,540 mm	64.6 in · 1,640 mm	+6% XE 55 Tradition
Height declared	88.4 in · 2,245 mm	88.4 in · 2,245 mm	—
Ground clearance declared	17.9 in · 455 mm	13.2 in · 335 mm	+36% 50-66 S (DT)
Fuel tank declared	77.1 qt · 73.0 L	52.8 qt · 50.0 L	+46% 50-66 S (DT)

Source

Source