0 material differences · fewer than 12

Tractor oneFiat 480 Special (DT)1977–1979No measured PTO figureTractor twoSOMECA 480 Special (TD)1977–1979No measured PTO figure

Which should you choose?

Read our verdict on the 480 Special (DT) and the 480 Special (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

0 material differences · 17 fields identical or within 5%, which is not counted as material

Fiat 480 Special (DT) and SOMECA 480 Special (TD), field by field
Field	480 Special (DT)	480 Special (TD)	Gap
Engine
Engine power, claimed claimed	47.3 hp	47.3 hp	—
Engine declared	FIAT-IVECO 8035.02.200 (300)	FIAT-IVECO 8035.02.200 (300)	—
Displacement declared	2.59 L	2.59 L	—
Maximum torque declared	112 lb·ft · 152 N·m	112 lb·ft · 152 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	Dry FERODO double clutch, type 11 inches	—	—
Hydraulics & hitch
Pump flow declared	5.8 gpm · 21.8 L/min	5.8 gpm · 21.8 L/min	—
Pressure declared	2,843 psi · 196 bar	2,843 psi · 196 bar	—
Three-point lift, at the coupling points declared	3,417 lb · 1,550 kg	3,417 lb · 1,550 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,189 lb · 1,900 kg	4,189 lb · 1,900 kg	—
Wheelbase declared	76.9 in · 1,953 mm	76.9 in · 1,953 mm	—
Length declared	119.0 in · 3,023 mm	119.0 in · 3,023 mm	—
Width declared	65.4–89.3 in · 1,660–2,268 mm	65.4–89.3 in · 1,660–2,268 mm	—
Height, over the safety frame declared	90.2 in · 2,290 mm	90.2 in · 2,290 mm	—
Ground clearance declared	14.6 in · 371 mm	14.6 in · 371 mm	—
Turning radius, braked declared	9.7 ft · 2.95 m	9.7 ft · 2.95 m	—
Fuel tank declared	57.1 qt · 54.0 L	57.1 qt · 54.0 L	—

Source

Source