7 material differences · fewer than 12
Tractor oneFiat 470 (V/DT)1980No measured PTO figureTractor twoNuffield 3/45 (345)1967–1969No measured PTO figure
Which should you choose?
Read our verdict on the 470 (V/DT) and the 3/45 (345) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 470 (V/DT) | 3/45 (345) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 45.3 hp | 44.9 hp | — |
| Engine declared | FIAT-IVECO 8035.01.320 | BMC 28 TD | differs |
| Displacement declared | 2.34 L | 2.83 L | +21% 3/45 (345) |
| Maximum torque declared | — | 117 lb·ft · 158 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal-operated two-stage dry FEREDO double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.6 gpm · 21.2 L/min | 8.2 gpm · 31.0 L/min | +46% 3/45 (345) |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,120 lb · 1,415 kg | 5,159 lb · 2,340 kg | +65% 3/45 (345) |
| Wheelbase declared | 73.4 in · 1,865 mm | 75.0 in · 1,905 mm | — |
| Length declared | 124.0 in · 3,150 mm | 120.1 in · 3,050 mm | — |
| Width declared | 48.0 in · 1,220 mm | 71.7 in · 1,820 mm | +49% 3/45 (345) |
| Ground clearance declared | 14.6 in · 370 mm | 16.1 in · 409 mm | +11% 3/45 (345) |
| Turning radius, braked declared | — | 10.8 ft · 3.30 m | — |
| Fuel tank declared | 57.1 qt · 54.0 L | 76.8 qt · 72.7 L | +35% 3/45 (345) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 470 (V/DT) sources
- Source: Traktorenlexikon, “Fiat 470 V/470 V/DT”
- Source: Traktorenlexikon, “Someca 470 V”
Nuffield 3/45 (345) sources
- Source: Traktorenlexikon, “Nuffield 3/45 (1967-1969)”