10 material differences · fewer than 12
Tractor oneFiat 466 (DT)1982–1986No measured PTO figureTractor twoWHITE 2-551982–1988No measured PTO figure
Which should you choose?
Read our verdict on the 466 (DT) and the 2-55 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 466 (DT) | 2-55 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | FIAT-IVECO 8035.02.276 or 376 | ISUZU-Motors 4 BC-2 | differs |
| Displacement declared | 2.59 L | 3.27 L | +26% 2-55 |
| Maximum torque declared | 125 lb·ft · 170 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | dry O.M.G, VALEO or LuK double clutch | Pedal operated dry DAIKIN single disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pressure declared | 3,336–3,481 psi · 230–240 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,027 lb · 2,280 kg | 5,071 lb · 2,300 kg | — |
| Wheelbase declared | 85.6 in · 2,175 mm | 80.3 in · 2,040 mm | +7% 466 (DT) |
| Length declared | 126.9 in · 3,222 mm | 137.4 in · 3,490 mm | +8% 2-55 |
| Width declared | 75.6 in · 1,920 mm | 63.6 in · 1,615 mm | +19% 466 (DT) |
| Ground clearance declared | 19.5 in · 495 mm | 16.9 in · 429 mm | +15% 466 (DT) |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 9.2 ft · 2.79 m | +29% 466 (DT) |
| Fuel tank declared | 77.1 qt · 73.0 L | 63.4 qt · 60.0 L | +22% 466 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 466 (DT) sources
- Source: Traktorenlexikon, “Fiat 466/466 DT”
WHITE 2-55 sources
- Source: Traktorenlexikon, “White 2-55”