Fiat 466 (DT) vs Steyr 948 (a)

11 material differences · fewer than 12

Tractor one

1982–1986

No measured PTO figure

Tractor two

1992–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 466 (DT) and the 948 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 466 (DT) and Steyr 948 (a), field by field
Field	466 (DT)	948 (a)	Gap
Engine
Engine power, claimed claimed	53.2 hp	47.3 hp	+12% 466 (DT)
Engine declared	FIAT-IVECO 8035.02.276 or 376	Steyr WD 308.85	differs
Displacement declared	2.59 L	2.36 L	+10% 466 (DT)
Maximum torque declared	125 lb·ft · 170 N·m	108 lb·ft · 147 N·m	+16% 466 (DT)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	dry O.M.G, VALEO or LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pressure declared	3,336–3,481 psi · 230–240 bar	—	—
Three-point lift at ends declared	5,732 lb · 2,600 kg	4,012 lb · 1,820 kg	+43% 466 (DT)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,027 lb · 2,280 kg	5,093 lb · 2,310 kg	—
Maximum permissible mass declared	—	7,716 lb · 3,500 kg	—
Wheelbase declared	85.6 in · 2,175 mm	77.5 in · 1,968 mm	+11% 466 (DT)
Length declared	126.9 in · 3,222 mm	129.5 in · 3,290 mm	—
Width declared	75.6 in · 1,920 mm	68.5 in · 1,740 mm	+10% 466 (DT)
Height declared	93.3 in · 2,370 mm	90.2 in · 2,290 mm	—
Ground clearance declared	19.5 in · 495 mm	17.5 in · 445 mm	+11% 466 (DT)
Turning radius, braked declared	11.8 ft · 3.60 m	10.5 ft · 3.19 m	+13% 466 (DT)
Fuel tank declared	77.1 qt · 73.0 L	56.0 qt · 53.0 L	+38% 466 (DT)

Source

Source