12 material differences

Tractor oneFiat 466 (DT)1982–1986No measured PTO figureTractor twoRenault Ceres 65 (A)1993–1995No measured PTO figure

Which should you choose?

Read our verdict on the 466 (DT) and the Ceres 65 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 466 (DT) and Renault Ceres 65 (A), field by field
Field	466 (DT)	Ceres 65 (A)	Gap
Engine
Engine power, claimed claimed	53.2 hp	53.2 hp	—
Engine declared	FIAT-IVECO 8035.02.276 or 376	MWM D 226-3	differs
Displacement declared	2.59 L	3.12 L	+20% Ceres 65 (A)
Maximum torque declared	125 lb·ft · 170 N·m	145 lb·ft · 196 N·m	+15% Ceres 65 (A)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	dry O.M.G, VALEO or LuK double clutch	Dry LuK double clutch type 280/280	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pressure declared	3,336–3,481 psi · 230–240 bar	—	—
Three-point lift, at the coupling points declared	5,732 lb · 2,600 kg	6,327 lb · 2,870 kg	+10% Ceres 65 (A)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,027 lb · 2,280 kg	6,283 lb · 2,850 kg	+25% Ceres 65 (A)
Maximum permissible mass declared	—	9,811 lb · 4,450 kg	—
Wheelbase declared	85.6 in · 2,175 mm	89.4 in · 2,270 mm	—
Length declared	126.9 in · 3,222 mm	142.5 in · 3,620 mm	+12% Ceres 65 (A)
Width declared	75.6 in · 1,920 mm	73.2–92.3 in · 1,860–2,345 mm	differs
Height, over the cab declared	93.3 in · 2,370 mm	93.7 in · 2,380 mm	—
Ground clearance declared	19.5 in · 495 mm	15.4 in · 390 mm	+27% 466 (DT)
Turning radius, braked declared	11.8 ft · 3.60 m	12.1 ft · 3.70 m	—
Fuel tank declared	77.1 qt · 73.0 L	121.5 qt · 115.0 L	+58% Ceres 65 (A)

Source

Source