Fiat 466 (DT) vs Ford 3610
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 466 (DT) and the 3610 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 466 (DT) | 3610 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 46.4 hp | +15% 466 (DT) |
| Engine declared | FIAT-IVECO 8035.02.276 or 376 | — | — |
| Displacement declared | 2.59 L | — | — |
| Maximum torque declared | 125 lb·ft · 170 N·m | 132 lb·ft · 179.5 N·m | +6% 3610 |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | dry O.M.G, VALEO or LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 7.2 gpm · 27.4 L/min | — |
| Pressure declared | 3,336–3,481 psi · 230–240 bar | — | — |
| Three-point lift at ends declared | 5,732 lb · 2,600 kg | 3,115 lb · 1,413 kg | +84% 466 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,027 lb · 2,280 kg | 5,335 lb · 2,420 kg | +6% 3610 |
| Wheelbase declared | 85.6 in · 2,175 mm | 75.8 in · 1,925 mm | +13% 466 (DT) |
| Length declared | 126.9 in · 3,222 mm | 128.0 in · 3,250 mm | — |
| Width declared | 75.6 in · 1,920 mm | 64.6 in · 1,640 mm | +17% 466 (DT) |
| Height declared | 93.3 in · 2,370 mm | 84.6 in · 2,150 mm | +10% 466 (DT) |
| Ground clearance declared | 19.5 in · 495 mm | 12.4 in · 315 mm | +57% 466 (DT) |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 10.1 ft · 3.07 m | +17% 466 (DT) |
| Fuel tank declared | 77.1 qt · 73.0 L | 52.0 qt · 49.2 L | +48% 466 (DT) |
Fiat 466 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 466/466 DT”
Ford 3610 sources
Source
- Source: Traktorenlexikon, “Ford 3610”