10 material differences · fewer than 12
Tractor oneFiat 466 (DT)1982–1986No measured PTO figureTractor twoFord 3055 (A)1971–1975No measured PTO figure
Which should you choose?
Read our verdict on the 466 (DT) and the 3055 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 466 (DT) | 3055 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | FIAT-IVECO 8035.02.276 or 376 | Ford 182 DF | differs |
| Displacement declared | 2.59 L | 3.00 L | +16% 3055 (A) |
| Maximum torque declared | 125 lb·ft · 170 N·m | 139 lb·ft · 188 N·m | +11% 3055 (A) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 12.4–15.5 mph · 20–25 km/h | differs |
| Clutch declared | dry O.M.G, VALEO or LuK double clutch | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pressure declared | 3,336–3,481 psi · 230–240 bar | — | — |
| Three-point lift, at the coupling points declared | 5,732 lb · 2,600 kg | 2,800 lb · 1,270 kg | +105% 466 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,027 lb · 2,280 kg | 4,224 lb · 1,916 kg | +19% 466 (DT) |
| Wheelbase declared | 85.6 in · 2,175 mm | 77.2 in · 1,960 mm | +11% 466 (DT) |
| Length declared | 126.9 in · 3,222 mm | 135.0 in · 3,430 mm | +6% 3055 (A) |
| Width declared | 75.6 in · 1,920 mm | 72.0 in · 1,830 mm | — |
| Ground clearance declared | 19.5 in · 495 mm | 19.5 in · 495 mm | — |
| Turning radius, braked declared | 11.8 ft · 3.60 m | — | — |
| Fuel tank declared | 77.1 qt · 73.0 L | 51.8 qt · 49 L | +49% 466 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 466 (DT) sources
- Source: Traktorenlexikon, “Fiat 466/466 DT”
Ford 3055 (A) sources
- Source: Traktorenlexikon, “Ford 3055”