10 material differences · fewer than 12
Tractor oneFiat 460 (DT)1980No measured PTO figureTractor twoWHITE 2-451980–1981No measured PTO figure
Which should you choose?
Read our verdict on the 460 (DT) and the 2-45 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 460 (DT) | 2-45 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47.3 hp | 47.3 hp | — |
| Engine declared | FIAT-IVECO 8035.01.300 | ISUZU-Motors 4 BA-1 | differs |
| Displacement declared | 2.34 L | 2.78 L | +19% 2-45 |
| Maximum torque declared | 110 lb·ft · 149 N·m | 111 lb·ft · 151 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 2-45 |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 7.1 gpm · 26.8 L/min | — | — |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Three-point lift, at the coupling points declared | 3,858 lb · 1,750 kg | 3,355 lb · 1,522 kg | +15% 460 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,990 lb · 1,810 kg | 5,214 lb · 2,365 kg | +31% 2-45 |
| Wheelbase declared | 76.9 in · 1,953 mm | 78.7 in · 1,999 mm | — |
| Length declared | 127.3 in · 3,233 mm | 137.8 in · 3,500 mm | +8% 2-45 |
| Width declared | 60.2–87.8 in · 1,530–2,230 mm | 70.9 in · 1,801 mm | differs |
| Ground clearance declared | 17.9 in · 455 mm | 13.0 in · 330 mm | +38% 460 (DT) |
| Turning radius, braked declared | 10.2 ft · 3.10 m | 9.4 ft · 2.85 m | +9% 460 (DT) |
| Fuel tank declared | 57.1 qt · 54.0 L | 63.4 qt · 60.0 L | +11% 2-45 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 460 (DT) sources
- Source: Traktorenlexikon, “Fiat 460/460 DT”
- Source: Traktorenlexikon, “Someca 450 N”
WHITE 2-45 sources
- Source: Traktorenlexikon, “White 2-45”