Fiat 450 SV/SE or ZETOR 4712?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 450 SV/SE has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4712 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fiat 450 SV/SE suits loader and hydraulic implement work better on this data: 17% (3.4 L/min / 0.9 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 450 SV/SE and ZETOR 4712, with the call on each
Question450 SV/SE4712Call
Which puts more power through the PTO shaft?33.1 kW (44.4 hp)Traktorenlexikon, “Fiat 450 SE/SV”33.1 kW (44.4 hp)Traktorenlexikon, “Zetor 4712”Not comparableNot comparable on power at the PTO shaft: the 450 SV/SE has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4712 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 450 SV/SE and the 4712.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 450 SV/SE and the 4712.
Which pumps more oil for implements?23.4 L/min (6.2 gpm)Traktorenlexikon, “Fiat 450 SE/SV”20.0 L/min (5.3 gpm)Traktorenlexikon, “Zetor 4712”AheadThe Fiat 450 SV/SE has 17% more hydraulic flow (3.4 L/min / 0.9 gpm) than the ZETOR 4712 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,500 kg (3,307 lb)Traktorenlexikon, “Fiat 450 SE/SV”No figureNo call on three-point lift: no figure on record for the 4712.
Which is heavier, for traction?1,750 kg (3,858 lb)Traktorenlexikon, “Fiat 450 SE/SV”2,050 kg (4,519 lb)Traktorenlexikon, “Zetor 4712”Ahead (a fact, not an advantage)The ZETOR 4712 is 17% heavier (300 kg / 661 lb) than the Fiat 450 SV/SE (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 450 SV/SE and the 4712.
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Fiat 450 SE/SV”10Traktorenlexikon, “Zetor 4712”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 450 SV/SE and the 4712.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Fiat 450 SE/SV”25 km/h (15.5 mph)Traktorenlexikon, “Zetor 4712”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Fiat 450 SE/SV”540 rpmTraktorenlexikon, “Zetor 4712”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 450 SE/SV”independentTraktorenlexikon, “Zetor 4712”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Fiat 450 SE/SV”2WDTraktorenlexikon, “Zetor 4712”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1978–19821972–1977Ahead (a fact, not an advantage)The Fiat 450 SV/SE is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 450 SV/SE has 17% more hydraulic flow (3.4 L/min / 0.9 gpm) than the ZETOR 4712 (both pump flow, as stated by the source).
  • The ZETOR 4712 is 17% heavier (300 kg / 661 lb) than the Fiat 450 SV/SE (both unladen weight, as stated by the source).
  • The Fiat 450 SV/SE is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • Not comparable on power at the PTO shaft: the 450 SV/SE has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4712 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources