11 material differences · fewer than 12
Tractor oneFiat 45-Rfrom 1952No measured PTO figureTractor twoMAN AS 2501938–1946No measured PTO figure
Which should you choose?
Read our verdict on the 45-R and the AS 250 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 45-R | AS 250 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 49.1 hp | +11% AS 250 |
| Engine declared | O.M.-FIAT CO 1D-45/Var. 10 | MAN D 0534 GS | differs |
| Displacement declared | 4.16 L | 4.50 L | +8% AS 250 |
| Maximum torque declared | 167 lb·ft · 226 N·m | 174 lb·ft · 235 N·m | — |
| Transmission | |||
| Top speed declared | 9.9 mph · 16 km/h | 12.4 mph · 20 km/h | +25% AS 250 |
| Clutch declared | Pedal-operated dry single-plate clutch | Fichtel & Sachs single-plate dry clutch Komet-Mecano | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | — | — |
| Rear PTO speeds declared | 540 rpm | 545 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 7,496–8,951 lb · 3,400–4,060 kg | differs |
| Wheelbase declared | 74.8 in · 1,900 mm | 82.7 in · 2,100 mm | +11% AS 250 |
| Length declared | 116.3 in · 2,955 mm | 144.9–154.7 in · 3,680–3,930 mm | differs |
| Width declared | 60.4–91.9 in · 1,535–2,335 mm | 72.8–88.6 in · 1,850–2,250 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 10.2 in · 260 mm | +54% 45-R |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 13.1 ft · 4.00 m | +21% AS 250 |
| Fuel tank declared | 53.9 qt · 51.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 45-R sources
- Source: Traktorenlexikon, “Fiat 45 R”
MAN AS 250 sources
- Source: Traktorenlexikon, “MAN AS 250”