Fiat 45-R or Lanz D 1500?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 45-R has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 1500 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fiat 45-R suits road haulage better on this data: 113% (8.5 km/h / 5.3 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 45-R and Lanz D 1500, with the call on each
Question45-RD 1500Call
Which puts more power through the PTO shaft?33.1 kW (44.4 hp)Traktorenlexikon, “Fiat 45 R”36.6 kW (49.1 hp)Traktorenlexikon, “Lanz D 1500”Not comparableNot comparable on power at the PTO shaft: the 45-R has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 1500 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 45-R and the D 1500.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 45-R and the D 1500.
Which pumps more oil for implements?20.0 L/min (5.3 gpm)Traktorenlexikon, “Fiat 45 R”—No figureNo call on hydraulic flow: no figure on record for the D 1500.
Which lifts more on the three-point hitch?950 kg (2,094 lb)Traktorenlexikon, “Fiat 45 R”—No figureNo call on three-point lift: no figure on record for the D 1500.
Which is heavier, for traction?2,300 kg (5,071 lb)Traktorenlexikon, “Fiat 45 R”3,600 kg (7,937 lb)Traktorenlexikon, “Lanz D 1500”Ahead (a fact, not an advantage)The Lanz D 1500 is 57% heavier (1,300 kg / 2,866 lb) than the Fiat 45-R (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 45-R and the D 1500.
Which has the wider choice of gears?6Traktorenlexikon, “Fiat 45 R”3Traktorenlexikon, “Lanz D 1500”AheadThe Fiat 45-R has 100% more forward gears (3 gears) than the Lanz D 1500 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 45-R and the D 1500.
Which is faster on the road?16 km/h (9.9 mph)Traktorenlexikon, “Fiat 45 R”7.5 km/h (4.7 mph)Traktorenlexikon, “Lanz D 1500”AheadThe Fiat 45-R has 113% more top speed (8.5 km/h / 5.3 mph) than the Lanz D 1500 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Fiat 45 R”750 rpmTraktorenlexikon, “Lanz D 1500”DifferPTO speeds differ: the Fiat 45-R 540 rpm and the Lanz D 1500 750 rpm — each offers a speed the other does not; which matters depends on the implement.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 45 R”—No figureNo call on PTO independence: not stated for the D 1500.
Which drives on both axles?2WDTraktorenlexikon, “Fiat 45 R”2WDTraktorenlexikon, “Lanz D 1500”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1952–1937–1940Ahead (a fact, not an advantage)The Fiat 45-R is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Lanz D 1500 is 57% heavier (1,300 kg / 2,866 lb) than the Fiat 45-R (both unladen weight, as stated by the source).
  • The Fiat 45-R has 100% more forward gears (3 gears) than the Lanz D 1500 (both forward gears, as stated by the source).
  • The Fiat 45-R has 113% more top speed (8.5 km/h / 5.3 mph) than the Lanz D 1500 (both top speed forward, as stated by the source).
  • The Fiat 45-R is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • PTO speeds differ: the Fiat 45-R 540 rpm and the Lanz D 1500 750 rpm — each offers a speed the other does not; which matters depends on the implement.
  • Even on drive: all two-wheel drive.
  • Not comparable on power at the PTO shaft: the 45-R has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 1500 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources