9 material differences · fewer than 12

Tractor oneFiat 45-Rfrom 1952No measured PTO figureTractor twoJohn Deere 6301958–1960No measured PTO figure

Which should you choose?

Read our verdict on the 45-R and the 630 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 1 fields identical or within 5%, which is not counted as material

Fiat 45-R and John Deere 630, field by field
Field45-R630Gap
Engine
Engine power, claimed claimed44.4 hp44.4 hp—
Engine declaredO.M.-FIAT CO 1D-45/Var. 10——
Displacement declared4.16 L——
Maximum torque declared167 lb·ft · 226 N·m——
Transmission
Top speed declared9.9 mph · 16 km/h11.8 mph · 19 km/h+19% 630
Clutch declaredPedal-operated dry single-plate clutch——
Hydraulics & hitch
Pump flow declared5.3 gpm · 20.0 L/min8.9 gpm · 33.7 L/min+69% 630
Rear PTO speeds declared540 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared5,071 lb · 2,300 kg5,858 lb · 2,657 kg+16% 630
Wheelbase declared74.8 in · 1,900 mm90.0 in · 2,286 mm+20% 630
Length declared116.3 in · 2,955 mm135.2 in · 3,435 mm+16% 630
Width declared60.4–91.9 in · 1,535–2,335 mm86.6 in · 2,200 mmdiffers
Ground clearance declared15.7 in · 400 mm25.3 in · 643 mm+61% 630
Turning radius, braked declared10.8 ft · 3.30 m8.6 ft · 2.63 m+25% 45-R
Fuel tank declared53.9 qt · 51.0 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat 45-R sources

Source
  • Source: Traktorenlexikon, “Fiat 45 R”

John Deere 630 sources

Source
  • Source: Traktorenlexikon, “John Deere Modell 630”