Fiat 45-66 V (DT/V) vs New Holland 3435 (A)
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 45-66 V (DT/V) and the 3435 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 45-66 V (DT/V) | 3435 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | FIAT-IVECO 8035.06.220 or 320 | IVECO 8035.06 | differs |
| Displacement declared | 2.71 L | 2.71 L | — |
| Maximum torque declared | 107 lb·ft · 144.6 N·m | 107 lb·ft · 144.6 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry Valeo or LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pressure declared | — | 3,118 psi · 215 bar | — |
| Three-point lift at ends declared | 3,968 lb · 1,800 kg | 4,685 lb · 2,125 kg | +18% 3435 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,373 lb · 1,530 kg | 4,321 lb · 1,960 kg | +28% 3435 (A) |
| Maximum permissible mass declared | — | 8,488 lb · 3,850 kg | — |
| Wheelbase declared | 72.6 in · 1,845 mm | 78.7 in · 1,999 mm | +8% 3435 (A) |
| Length declared | 113.6 in · 2,885 mm | 127.6 in · 3,240 mm | +12% 3435 (A) |
| Width declared | 53.5 in · 1,360 mm | 60.6 in · 1,540 mm | +13% 3435 (A) |
| Height declared | 81.1 in · 2,060 mm | 89.4 in · 2,270 mm | +10% 3435 (A) |
| Ground clearance declared | 12.8 in · 325 mm | 14.8 in · 375 mm | +15% 3435 (A) |
| Fuel tank declared | 52.8 qt · 50.0 L | 44.4 qt · 42.0 L | +19% 45-66 V (DT/V) |
Fiat 45-66 V (DT/V) sources
Source
- Source: Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”
New Holland 3435 (A) sources
Source
- Source: Traktorenlexikon, “New Holland 3435”