Fiat 45-66 V (DT/V) vs Massey Ferguson MF 240

10 material differences · fewer than 12

Tractor one

1985–1992

No measured PTO figure

Tractor two

1982–1985

No measured PTO figure

Which should you choose?

Read our verdict on the 45-66 V (DT/V) and the MF 240 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 45-66 V (DT/V) and Massey Ferguson MF 240, field by field
Field	45-66 V (DT/V)	MF 240	Gap
Engine
Engine power, claimed claimed	44.4 hp	46.4 hp	—
Engine declared	FIAT-IVECO 8035.06.220 or 320	Perkins AD 3.152	differs
Displacement declared	2.71 L	2.50 L	+8% 45-66 V (DT/V)
Maximum torque declared	107 lb·ft · 144.6 N·m	127 lb·ft · 173 N·m	+20% MF 240
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Dry Valeo or LuK double clutch	Pedal-operated, dry and air-cooled Auburn dual clutch	differs
Hydraulics & hitch
Pump flow declared	—	5.2 gpm · 19.8 L/min	—
Three-point lift at ends declared	3,968 lb · 1,800 kg	3,153 lb · 1,430 kg	+26% 45-66 V (DT/V)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	3,373 lb · 1,530 kg	3,924 lb · 1,780 kg	+16% MF 240
Wheelbase declared	72.6 in · 1,845 mm	74.6 in · 1,896 mm	—
Length declared	113.6 in · 2,885 mm	124.8 in · 3,170 mm	+10% MF 240
Width declared	53.5 in · 1,360 mm	64.2 in · 1,630 mm	+20% MF 240
Height declared	81.1 in · 2,060 mm	83.5 in · 2,120 mm	—
Ground clearance declared	12.8 in · 325 mm	12.2 in · 310 mm	—
Turning radius, braked declared	—	10.0 ft · 3.06 m	—
Fuel tank declared	52.8 qt · 50.0 L	50.7 qt · 48 L	—

Source

Source