7 material differences · fewer than 12
Tractor oneFiat 44-281979–1982No measured PTO figureTractor twoSchlüter Profi Trac 3000 TVL1975–1988No measured PTO figure
Which should you choose?
Read our verdict on the 44-28 and the Profi Trac 3000 TVL → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 44-28 | Profi Trac 3000 TVL | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 276.4 hp | 279.7 hp | — |
| Engine declared | CUMMINS NT-855 C 280 | MAN D 2556 MTE | differs |
| Displacement declared | 14.02 L | 11.05 L | +27% 44-28 |
| Maximum torque declared | 863 lb·ft · 1,170 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 20.8 mph · 33.4 km/h | +34% Profi Trac 3000 TVL |
| Clutch declared | Dry Dana-Spicer double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 23.6 gpm · 89.4 L/min | 9.0 gpm · 34.0 L/min | +163% 44-28 |
| Pressure declared | 3,336–3,481 psi · 230–240 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 22,972 lb · 10,420 kg | 25,353 lb · 11,500 kg | +10% Profi Trac 3000 TVL |
| Wheelbase declared | 131.5 in · 3,340 mm | 113.8 in · 2,890 mm | +16% 44-28 |
| Length declared | 255.9 in · 6,500 mm | 243.2 in · 6,177 mm | — |
| Width declared | 99.6 in · 2,530 mm | 98.3 in · 2,498 mm | — |
| Ground clearance declared | 16.5 in · 420 mm | — | — |
| Turning radius, braked declared | — | 15.1 ft · 4.60 m | — |
| Fuel tank declared | 739.7 qt · 700.0 L | 470.2 qt · 445 L | +57% 44-28 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 44-28 sources
- Source: Traktorenlexikon, “Fiat Fiat 44-28”
Schlüter Profi Trac 3000 TVL sources
- Source: Traktorenlexikon, “Schlüter Profi Trac 3000 TVL”