Fiat 44-28 or Massey Ferguson MF 4840?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 44-28 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 4840 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Massey Ferguson 4840 suits road haulage better on this data: 24% (5.9 km/h / 3.7 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 44-28 | MF 4840 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 206.1 kW (276.4 hp)Traktorenlexikon, “Fiat Fiat 44-28” | 191.5 kW (256.8 hp)Traktorenlexikon, “Massey Ferguson MF 4840” | Not comparableNot comparable on power at the PTO shaft: the 44-28 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 4840 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 44-28 and the MF 4840. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 44-28 and the MF 4840. |
| Which pumps more oil for implements? | 89.4 L/min (23.6 gpm)Traktorenlexikon, “Fiat Fiat 44-28” | — | No figureNo call on hydraulic flow: no figure on record for the MF 4840. |
| Which lifts more on the three-point hitch? | 8,300 kg (18,298 lb)Traktorenlexikon, “Fiat Fiat 44-28” | 4,983 kg (10,986 lb)Traktorenlexikon, “Massey Ferguson MF 4840” | Not comparableNot comparable on three-point lift: the 44-28: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat Fiat 44-28”); the MF 4840: lift at an unstated point, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 4840”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 10,420 kg (22,972 lb)Traktorenlexikon, “Fiat Fiat 44-28” | 11,820 kg (26,059 lb)Traktorenlexikon, “Massey Ferguson MF 4840” | Ahead (a fact, not an advantage)The Massey Ferguson 4840 is 13% heavier (1,400 kg / 3,086 lb) than the Fiat 44-28 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 44-28 and the MF 4840. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Fiat Fiat 44-28” | 18Traktorenlexikon, “Massey Ferguson MF 4840” | AheadThe Massey Ferguson 4840 has 50% more forward gears (6 gears) than the Fiat 44-28 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 44-28 and the MF 4840. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Fiat Fiat 44-28” | 30.9 km/h (19.2 mph)Traktorenlexikon, “Massey Ferguson MF 4840” | AheadThe Massey Ferguson 4840 has 24% more top speed (5.9 km/h / 3.7 mph) than the Fiat 44-28 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Fiat Fiat 44-28” | 1000 rpmTraktorenlexikon, “Massey Ferguson MF 4840” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiat Fiat 44-28” | — | No figureNo call on PTO independence: not stated for the MF 4840. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Fiat Fiat 44-28” | 4WDTraktorenlexikon, “Massey Ferguson MF 4840” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1979–1982 | 1978–1986 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson 4840 is 13% heavier (1,400 kg / 3,086 lb) than the Fiat 44-28 (both unladen weight, as stated by the source).
- The Massey Ferguson 4840 has 50% more forward gears (6 gears) than the Fiat 44-28 (both forward gears, as stated by the source).
- The Massey Ferguson 4840 has 24% more top speed (5.9 km/h / 3.7 mph) than the Fiat 44-28 (both top speed forward, as stated by the source).
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 44-28 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 4840 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the 44-28: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat Fiat 44-28”); the MF 4840: lift at an unstated point, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 4840”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources