Fiat 44-23 or WHITE 4-225?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 44-23 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4-225 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The WHITE 4-225 suits loader and hydraulic implement work better on this data: 31% (28.1 L/min / 7.4 gpm) more hydraulic flow.
- The WHITE 4-225 suits road haulage better on this data: 60% (15.0 km/h / 9.3 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 44-23 | 4-225 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 169.3 kW (227.0 hp)Traktorenlexikon, “Fiat Fiat 44-23” | 165.5 kW (221.9 hp)Traktorenlexikon, “White 4-225” | Not comparableNot comparable on power at the PTO shaft: the 44-23 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4-225 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 44-23 and the 4-225. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 44-23 and the 4-225. |
| Which pumps more oil for implements? | 89.4 L/min (23.6 gpm)Traktorenlexikon, “Fiat Fiat 44-23” | 117.5 L/min (31.0 gpm)Traktorenlexikon, “White 4-225” | AheadThe WHITE 4-225 has 31% more hydraulic flow (28.1 L/min / 7.4 gpm) than the Fiat 44-23 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 8,300 kg (18,298 lb)Traktorenlexikon, “Fiat Fiat 44-23” | 3,086 kg (6,803 lb)Traktorenlexikon, “White 4-225” | Not comparableNot comparable on three-point lift: the 44-23: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat Fiat 44-23”); the 4-225: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “White 4-225”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 11,061 kg (24,385 lb)Traktorenlexikon, “Fiat Fiat 44-23” | 10,323 kg (22,758 lb)Traktorenlexikon, “White 4-225” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 44-23 and the 4-225. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Fiat Fiat 44-23” | 18Traktorenlexikon, “White 4-225” | AheadThe WHITE 4-225 has 50% more forward gears (6 gears) than the Fiat 44-23 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 44-23 and the 4-225. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Fiat Fiat 44-23” | 40 km/h (24.9 mph)Traktorenlexikon, “White 4-225” | AheadThe WHITE 4-225 has 60% more top speed (15.0 km/h / 9.3 mph) than the Fiat 44-23 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Fiat Fiat 44-23” | 1000 rpmTraktorenlexikon, “White 4-225” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiat Fiat 44-23” | independentTraktorenlexikon, “White 4-225” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Fiat Fiat 44-23” | 4WDTraktorenlexikon, “White 4-225” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1979–1982 | 1983–1987 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The WHITE 4-225 has 31% more hydraulic flow (28.1 L/min / 7.4 gpm) than the Fiat 44-23 (both pump flow, as stated by the source).
- The WHITE 4-225 has 50% more forward gears (6 gears) than the Fiat 44-23 (both forward gears, as stated by the source).
- The WHITE 4-225 has 60% more top speed (15.0 km/h / 9.3 mph) than the Fiat 44-23 (both top speed forward, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 44-23 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4-225 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the 44-23: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat Fiat 44-23”); the 4-225: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “White 4-225”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources