3 material differences · fewer than 12

Tractor oneFiat 400 V/E1968–1971No measured PTO figureTractor twoSOMECA 400 (DT)1968–1971No measured PTO figure

Which should you choose?

Read our verdict on the 400 V/E and the 400 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

3 material differences · 12 fields identical or within 5%, which is not counted as material

Fiat 400 V/E and SOMECA 400 (DT), field by field
Field	400 V/E	400 (DT)	Gap
Engine
Engine power, claimed claimed	34 hp	34 hp	—
Engine declared	O.M.-FIAT 8035.01.201	O.M.-FIAT 8035.01.201	—
Displacement declared	2.34 L	2.34 L	—
Maximum torque declared	103 lb·ft · 140 N·m	103 lb·ft · 140 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	Pedal operated two-stage dry FEREDO double clutch	—	—
Hydraulics & hitch
Pump flow declared	5.8 gpm · 21.8 L/min	5.8 gpm · 21.8 L/min	—
Pressure declared	—	2,843 psi · 196 bar	—
Three-point lift, at the coupling points declared	2,866 lb · 1,300 kg	2,866 lb · 1,300 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,549 lb · 1,610 kg	3,748 lb · 1,700 kg	+6% 400 (DT)
Wheelbase declared	74.2 in · 1,885 mm	75.6 in · 1,920 mm	—
Length declared	127.2 in · 3,230 mm	126.0 in · 3,200 mm	—
Width declared	38.6–43.3 in · 980–1,100 mm	62.4–88.2 in · 1,585–2,240 mm	differs
Height, over the exhaust declared	69.7 in · 1,770 mm	67.5 in · 1,715 mm	—
Ground clearance declared	13.4 in · 340 mm	14.6 in · 370 mm	+9% 400 (DT)
Turning radius, braked declared	—	9.7 ft · 2.95 m	—
Fuel tank declared	57.1 qt · 54.0 L	57.1 qt · 54.0 L	—

Source

Source