Fiat 350 / Spezial (DT) vs SOMECA 400 (DT)

13 material differences

Tractor one

1968–1974

No measured PTO figure

Tractor two

1968–1971

No measured PTO figure

Which should you choose?

Read our verdict on the 350 / Spezial (DT) and the 400 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 350 / Spezial (DT) and SOMECA 400 (DT), field by field
Field	350 / Spezial (DT)	400 (DT)	Gap
Engine
Engine power, claimed claimed	32.6 hp	34 hp	—
Engine declared	FIAT-IVECO 8025.02.001	O.M.-FIAT 8035.01.201	differs
Displacement declared	1.73 L	2.34 L	+35% 400 (DT)
Maximum torque declared	83 lb·ft · 112 N·m	103 lb·ft · 140 N·m	+25% 400 (DT)
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Hydraulics & hitch
Pump flow declared	3.8 gpm · 14.4 L/min	5.8 gpm · 21.8 L/min	+51% 400 (DT)
Pressure declared	2,843 psi · 196 bar	2,843 psi · 196 bar	—
Three-point lift at ends declared	1,709 lb · 775 kg	2,866 lb · 1,300 kg	+68% 400 (DT)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,120 lb · 1,415 kg	3,748 lb · 1,700 kg	+20% 400 (DT)
Wheelbase declared	69.9 in · 1,775 mm	75.6 in · 1,920 mm	+8% 400 (DT)
Length declared	107.5 in · 2,730 mm	126.0 in · 3,200 mm	+17% 400 (DT)
Width declared	58.3 in · 1,480 mm	62.4 in · 1,585 mm	+7% 400 (DT)
Height declared	55.1 in · 1,400 mm	67.5 in · 1,715 mm	+23% 400 (DT)
Ground clearance declared	18.5 in · 470 mm	14.6 in · 370 mm	+27% 350 / Spezial (DT)
Turning radius, braked declared	9.0 ft · 2.75 m	9.7 ft · 2.95 m	+7% 400 (DT)
Fuel tank declared	35.9 qt · 34.0 L	57.1 qt · 54.0 L	+59% 400 (DT)

Source

Source