Fiat 350 / Spezial (DT) vs John Deere-LANZ 310

15 material differences

Tractor one

1968–1974

No measured PTO figure

Tractor two

1964–1968

No measured PTO figure

Which should you choose?

Read our verdict on the 350 / Spezial (DT) and the 310 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 1 fields identical or within 5%, which is not counted as material

Fiat 350 / Spezial (DT) and John Deere-LANZ 310, field by field
Field	350 / Spezial (DT)	310	Gap
Engine
Engine power, claimed claimed	32.6 hp	31.5 hp	—
Engine declared	FIAT-IVECO 8025.02.001	John Deere 152 D 25 L	differs
Displacement declared	1.73 L	2.49 L	+44% 310
Maximum torque declared	83 lb·ft · 112 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	12.4–15.5 mph · 20–25 km/h	differs
Hydraulics & hitch
Pump flow declared	3.8 gpm · 14.4 L/min	4.1 gpm · 15.6 L/min	+8% 310
Pressure declared	2,843 psi · 196 bar	2,190 psi · 151 bar	+30% 350 / Spezial (DT)
Three-point lift at ends declared	1,709 lb · 775 kg	2,646 lb · 1,200 kg	+55% 310
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,120 lb · 1,415 kg	4,361 lb · 1,978 kg	+40% 310
Maximum permissible mass declared	—	5,864 lb · 2,660 kg	—
Wheelbase declared	69.9 in · 1,775 mm	81.6 in · 2,072 mm	+17% 310
Length declared	107.5 in · 2,730 mm	133.9 in · 3,400 mm	+25% 310
Width declared	58.3 in · 1,480 mm	62.2 in · 1,580 mm	+7% 310
Height declared	55.1 in · 1,400 mm	61.8 in · 1,570 mm	+12% 310
Ground clearance declared	18.5 in · 470 mm	15.7 in · 400 mm	+18% 350 / Spezial (DT)
Turning radius, braked declared	9.0 ft · 2.75 m	10.8 ft · 3.30 m	+20% 310
Fuel tank declared	35.9 qt · 34.0 L	74.0 qt · 70 L	+106% 310

Source

Source