Fiat 350 / Spezial (DT) vs John Deere 820

13 material differences

Tractor one

1968–1974

No measured PTO figure

Tractor two

1967–1975

No measured PTO figure

Which should you choose?

Read our verdict on the 350 / Spezial (DT) and the 820 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 350 / Spezial (DT) and John Deere 820, field by field
Field	350 / Spezial (DT)	820	Gap
Engine
Engine power, claimed claimed	32.6 hp	31.5 hp	—
Engine declared	FIAT-IVECO 8025.02.001	John Deere M 4 3 L 9 or 3.152 DL-01	differs
Displacement declared	1.73 L	2.47 L	+43% 820
Maximum torque declared	83 lb·ft · 112 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	12.4–15.5 mph · 20–25 km/h	differs
Clutch declared	—	Pedal operated dry Fichtel & Sachs single disc clutch	—
Hydraulics & hitch
Pump flow declared	3.8 gpm · 14.4 L/min	6.9 gpm · 26.0 L/min	+81% 820
Pressure declared	2,843 psi · 196 bar	1,944 psi · 134 bar	+46% 350 / Spezial (DT)
Three-point lift at ends declared	1,709 lb · 775 kg	2,745 lb · 1,245 kg	+61% 820
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,120 lb · 1,415 kg	4,740 lb · 2,150 kg	+52% 820
Maximum permissible mass declared	—	7,716 lb · 3,500 kg	—
Wheelbase declared	69.9 in · 1,775 mm	74.4 in · 1,890 mm	+6% 820
Length declared	107.5 in · 2,730 mm	134.8 in · 3,425 mm	+25% 820
Width declared	58.3 in · 1,480 mm	59.1 in · 1,500 mm	—
Height declared	55.1 in · 1,400 mm	59.6 in · 1,515 mm	+8% 820
Ground clearance declared	18.5 in · 470 mm	15.7 in · 400 mm	+18% 350 / Spezial (DT)
Turning radius, braked declared	9.0 ft · 2.75 m	9.2 ft · 2.80 m	—
Fuel tank declared	35.9 qt · 34.0 L	66.0 qt · 62.5 L	+84% 820

Source

Source