Fiat 35-66 (DT) vs UTB U-360
12 material differences
Which should you choose?
Read our verdict on the 35-66 (DT) and the U-360 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 35-66 (DT) | U-360 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.6 hp | 34.5 hp | — |
| Engine declared | LOMBARDINI LDW-1503/B2 | UTB D-115.000 | differs |
| Displacement declared | 1.55 L | 2.40 L | +55% U-360 |
| Maximum torque declared | 67 lb·ft · 90.9 N·m | 97 lb·ft · 132 N·m | +45% U-360 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 14.3 mph · 23 km/h | +30% 35-66 (DT) |
| Clutch declared | Dry Valeo or LuK double clutch, type 9/9" | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.8 gpm · 21.8 L/min | — |
| Pressure declared | 2,872 psi · 198 bar | — | — |
| Three-point lift at ends declared | 2,474 lb · 1,122 kg | 2,646 lb · 1,200 kg | +7% U-360 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,888 lb · 1,310 kg | 3,799 lb · 1,723 kg | +32% U-360 |
| Wheelbase declared | 66.9 in · 1,700 mm | 75.5 in · 1,918 mm | +13% U-360 |
| Length declared | 114.6 in · 2,910 mm | 113.0 in · 2,870 mm | — |
| Width declared | 54.3 in · 1,380 mm | 65.9 in · 1,674 mm | +21% U-360 |
| Height declared | 78.7 in · 2,000 mm | 55.2 in · 1,403 mm | +43% 35-66 (DT) |
| Ground clearance declared | 14.6 in · 370 mm | 18.0 in · 457 mm | +24% U-360 |
| Turning radius, braked declared | 8.4 ft · 2.56 m | 9.7 ft · 2.95 m | +15% U-360 |
| Fuel tank declared | 37.0 qt · 35.0 L | 56.0 qt · 53.0 L | +51% U-360 |
Fiat 35-66 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 35-66/35-66 DT”
UTB U-360 sources
Source
- Source: Traktorenlexikon, “UTB U 360”
- Source: Traktorenlexikon, “UTB U 453 DT”