Fiat 35-66 (DT) or International Harvester 364?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 35-66 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 364 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fiat 35-66 (DT) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 35-66 (DT) | 364 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 25.8 kW (34.6 hp)Traktorenlexikon, “Fiat 35-66/35-66 DT” | 26.5 kW (35.5 hp)Traktorenlexikon, “IHC 364” | Not comparableNot comparable on power at the PTO shaft: the 35-66 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 364 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 35-66 (DT) and the 364. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 35-66 (DT) and the 364. |
| Which pumps more oil for implements? | — | 27.3 L/min (7.2 gpm)Traktorenlexikon, “IHC 364” | No figureNo call on hydraulic flow: no figure on record for the 35-66 (DT). |
| Which lifts more on the three-point hitch? | 1,122 kg (2,474 lb)Traktorenlexikon, “Fiat 35-66/35-66 DT” | — | No figureNo call on three-point lift: no figure on record for the 364. |
| Which is heavier, for traction? | 1,310 kg (2,888 lb)Traktorenlexikon, “Fiat 35-66/35-66 DT” | 1,791 kg (3,948 lb)Traktorenlexikon, “IHC 364” | Ahead (a fact, not an advantage)The International Harvester 364 is 37% heavier (481 kg / 1,060 lb) than the Fiat 35-66 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 35-66 (DT) and the 364. |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Fiat 35-66/35-66 DT” | 8Traktorenlexikon, “IHC 364” | AheadThe Fiat 35-66 (DT) has 100% more forward gears (8 gears) than the International Harvester 364 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 35-66 (DT) and the 364. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 35-66/35-66 DT” | 25 km/h (15.5 mph)Traktorenlexikon, “IHC 364” | AheadThe Fiat 35-66 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 364 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Fiat 35-66/35-66 DT” | 540 rpmTraktorenlexikon, “IHC 364” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiat 35-66/35-66 DT” | independentTraktorenlexikon, “IHC 364” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 35-66/35-66 DT” | 2WDTraktorenlexikon, “IHC 364” | AheadThe Fiat 35-66 (DT) is available with four-wheel drive; the International Harvester 364 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1990–1998 | 1976–1977 | Ahead (a fact, not an advantage)The Fiat 35-66 (DT) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The International Harvester 364 is 37% heavier (481 kg / 1,060 lb) than the Fiat 35-66 (DT) (both unladen weight, as stated by the source).
- The Fiat 35-66 (DT) has 100% more forward gears (8 gears) than the International Harvester 364 (both forward gears, as stated by the source).
- The Fiat 35-66 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 364 (both top speed forward, as stated by the source).
- The Fiat 35-66 (DT) is available with four-wheel drive; the International Harvester 364 is two-wheel drive (as stated by the sources).
- The Fiat 35-66 (DT) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on PTO independence: every PTO is independent.
- Not comparable on power at the PTO shaft: the 35-66 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 364 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources