4 material differences · fewer than 12
Tractor oneFiat 250 (DT)1968–1974No measured PTO figureTractor twoSOMECA 250 (DT)1968–1971No measured PTO figure
Which should you choose?
Read our verdict on the 250 (DT) and the 250 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 12 fields identical or within 5%, which is not counted as material
| Field | 250 (DT) | 250 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.7 hp | 24.7 hp | — |
| Engine declared | FIAT 852.000 | FIAT-TRATTORI 852 A | differs |
| Displacement declared | 1.56 L | 1.56 L | — |
| Maximum torque declared | 58 lb·ft · 79 N·m | 58 lb·ft · 79 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | dry FIAT single-plate clutch operated by pedal | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 2.5 gpm · 9.3 L/min | 2.5 gpm · 9.3 L/min | — |
| Three-point lift, at the coupling points declared | 1,323 lb · 600 kg | 1,323 lb · 600 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,690 lb · 1,220 kg | 2,359 lb · 1,070 kg | +14% 250 (DT) |
| Wheelbase declared | 66.9 in · 1,700 mm | 66.9 in · 1,700 mm | — |
| Length declared | 107.9 in · 2,740 mm | 115.4 in · 2,930 mm | +7% 250 (DT) |
| Width declared | 50.8 in · 1,290 mm | 57.7–78.3 in · 1,465–1,990 mm | differs |
| Height, over the steering wheel declared | 61.8 in · 1,570 mm | 61.8 in · 1,570 mm | — |
| Ground clearance declared | 18.5 in · 470 mm | 18.5 in · 470 mm | — |
| Turning radius, braked declared | 9.2 ft · 2.80 m | 9.2 ft · 2.80 m | — |
| Fuel tank declared | 30.6 qt · 29.0 L | 30.6 qt · 29.0 L | — |
Fiat 250 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 250/250 DT”
SOMECA 250 (DT) sources
Source
- Source: Traktorenlexikon, “Someca 250”