12 material differences

Tractor oneFiat 250 (DT)1968–1974No measured PTO figureTractor twoGüldner G 251963–1969No measured PTO figure

Which should you choose?

Read our verdict on the 250 (DT) and the G 25 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 250 (DT) and Güldner G 25, field by field
Field	250 (DT)	G 25	Gap
Engine
Engine power, claimed claimed	24.7 hp	23.7 hp	—
Engine declared	FIAT 852.000	Güldner 2 L 79	differs
Displacement declared	1.56 L	1.57 L	—
Maximum torque declared	58 lb·ft · 79 N·m	60 lb·ft · 81 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	12.4–15.5 mph · 20–25 km/h	differs
Clutch declared	dry FIAT single-plate clutch operated by pedal	Pedal operated dry double clutch by Fichtel & Sachs	differs
Hydraulics & hitch
Pump flow declared	2.5 gpm · 9.3 L/min	—	—
Pressure declared	—	2,134 psi · 147 bar	—
Three-point lift, at the coupling points declared	1,323 lb · 600 kg	2,910 lb · 1,320 kg	+120% G 25
Rear PTO speeds declared	540 rpm	540/1050 rpm	differs
Weight & dimensions
Unladen weight declared	2,690 lb · 1,220 kg	3,902 lb · 1,770 kg	+45% G 25
Maximum permissible mass declared	—	5,952 lb · 2,700 kg	—
Wheelbase declared	66.9 in · 1,700 mm	73.0 in · 1,854 mm	+9% G 25
Length declared	107.9 in · 2,740 mm	123.4 in · 3,135 mm	+14% G 25
Width declared	50.8 in · 1,290 mm	62.6 in · 1,590 mm	+23% G 25
Height, over the steering wheel declared	61.8 in · 1,570 mm	57.9 in · 1,470 mm	+7% 250 (DT)
Ground clearance declared	18.5 in · 470 mm	15.4 in · 390 mm	+21% 250 (DT)
Turning radius, braked declared	9.2 ft · 2.80 m	—	—
Fuel tank declared	30.6 qt · 29.0 L	50.7 qt · 48 L	+66% G 25

Source

Source