Fiat 250 (DT) vs Güldner A 2 BL
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 250 (DT) and the A 2 BL → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 250 (DT) | A 2 BL | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.7 hp | 24.5 hp | — |
| Engine declared | FIAT 852.000 | Güldner 2 LB | differs |
| Displacement declared | 1.56 L | 1.84 L | +18% A 2 BL |
| Maximum torque declared | 58 lb·ft · 79 N·m | 72 lb·ft · 98 N·m | +24% A 2 BL |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 11.8 mph · 19.0 km/h | +32% 250 (DT) |
| Clutch declared | dry FIAT single-plate clutch operated by pedal | Pedal operated dry Fichtel & Sachs single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 2.5 gpm · 9.3 L/min | — | — |
| Pressure declared | — | 1,991 psi · 137 bar | — |
| Three-point lift at ends declared | 1,323 lb · 600 kg | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,690 lb · 1,220 kg | 3,219 lb · 1,460 kg | +20% A 2 BL |
| Maximum permissible mass declared | — | 4,409 lb · 2,000 kg | — |
| Wheelbase declared | 66.9 in · 1,700 mm | 78.0 in · 1,980 mm | +16% A 2 BL |
| Length declared | 107.9 in · 2,740 mm | 123.5 in · 3,138 mm | +15% A 2 BL |
| Width declared | 50.8 in · 1,290 mm | 59.1 in · 1,500 mm | +16% A 2 BL |
| Height declared | 61.8 in · 1,570 mm | 63.0 in · 1,600 mm | — |
| Ground clearance declared | 18.5 in · 470 mm | 16.1 in · 410 mm | +15% 250 (DT) |
| Turning radius, braked declared | 9.2 ft · 2.80 m | — | — |
| Fuel tank declared | 30.6 qt · 29.0 L | 37.0 qt · 35 L | +21% A 2 BL |
Fiat 250 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 250/250 DT”
Güldner A 2 BL sources
Source
- Source: Traktorenlexikon, “Güldner A 2 BL”