Fiat 25 R or Lanz D 7506 Allzweck?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Lanz D 7506 Allzweck is ahead on top speed; the Fiat 25R is ahead on drive.

  • The Lanz D 7506 Allzweck suits road haulage better on this data: 18% (2.7 km/h / 1.7 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 25 R and Lanz D 7506 Allzweck, with the call on each
Question25 RD 7506 AllzweckCall
Which puts more power through the PTO shaft?14.7 kW (20 hp)Traktorenlexikon, “Fiat 25 R (1953-1957)”14.7 kW (20 hp)Traktorenlexikon, “Lanz D 7506 Allzweck”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 25 R and the D 7506 Allzweck.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 25 R and the D 7506 Allzweck.
Which pumps more oil for implements?——No figureNo call on hydraulic flow: no figure on record for the 25 R and the D 7506 Allzweck.
Which lifts more on the three-point hitch?——No figureNo call on three-point lift: no figure on record for the 25 R and the D 7506 Allzweck.
Which is heavier, for traction?1,595 kg (3,516 lb)Traktorenlexikon, “Fiat 25 R (1953-1957)”2,880 kg (6,349 lb)Traktorenlexikon, “Lanz D 7506 Allzweck”Ahead (a fact, not an advantage)The Lanz D 7506 Allzweck is 81% heavier (1,285 kg / 2,833 lb) than the Fiat 25R (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 25 R and the D 7506 Allzweck.
Which has the wider choice of gears?4 to 5Traktorenlexikon, “Fiat 25 R (1953-1957)”6Traktorenlexikon, “Lanz D 7506 Allzweck”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?YesTraktorenlexikon, “Fiat 25 R (1953-1957)”—No figureNo call on a creeper range: not stated for the D 7506 Allzweck.
Which is faster on the road?15 km/h (9.3 mph)Traktorenlexikon, “Fiat 25 R (1953-1957)”17.7 km/h (11.0 mph)Traktorenlexikon, “Lanz D 7506 Allzweck”AheadThe Lanz D 7506 Allzweck has 18% more top speed (2.7 km/h / 1.7 mph) than the Fiat 25R (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Fiat 25 R (1953-1957)”760Traktorenlexikon, “Lanz D 7506 Allzweck”No figureNo call on PTO speeds: no standard PTO speed stated for the D 7506 Allzweck.
Which PTO runs independently of the ground drive?dependent (stops with the clutch)Traktorenlexikon, “Fiat 25 R (1953-1957)”—No figureNo call on PTO independence: not stated for the D 7506 Allzweck.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 25 R (1953-1957)”2WDTraktorenlexikon, “Lanz D 7506 Allzweck”AheadThe Fiat 25R is available with four-wheel drive; the Lanz D 7506 Allzweck is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1953–19571939–1942Ahead (a fact, not an advantage)The Fiat 25R is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Lanz D 7506 Allzweck is 81% heavier (1,285 kg / 2,833 lb) than the Fiat 25R (both unladen weight, as stated by the source).
  • The Lanz D 7506 Allzweck has 18% more top speed (2.7 km/h / 1.7 mph) than the Fiat 25R (both top speed forward, as stated by the source).
  • The Fiat 25R is available with four-wheel drive; the Lanz D 7506 Allzweck is two-wheel drive (as stated by the sources).
  • The Fiat 25R is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources