Fiat 1880 (DT) or WHITE 4-175?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 1880 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4-175 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The WHITE 4-175 suits loader and hydraulic implement work better on this data: 49% (27.5 L/min / 7.3 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 1880 (DT) and WHITE 4-175, with the call on each
Question1880 (DT)4-175Call
Which puts more power through the PTO shaft?132.5 kW (177.7 hp)Traktorenlexikon, “Fiat 1880 DT”130.2 kW (174.6 hp)Traktorenlexikon, “White 4-175”Not comparableNot comparable on power at the PTO shaft: the 1880 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4-175 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 1880 (DT) and the 4-175.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 1880 (DT) and the 4-175.
Which pumps more oil for implements?55.8 L/min (14.7 gpm)Traktorenlexikon, “Fiat 1880 DT”83.3 L/min (22.0 gpm)Traktorenlexikon, “White 4-175”AheadThe WHITE 4-175 has 49% more hydraulic flow (27.5 L/min / 7.3 gpm) than the Fiat 1880 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,900 kg (13,007 lb)Traktorenlexikon, “Fiat 1880 DT”2,722 kg (6,001 lb)Traktorenlexikon, “White 4-175”Not comparableNot comparable on three-point lift: the 1880 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 1880 DT”); the 4-175: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “White 4-175”) — not the same quantity, basis and condition.
Which is heavier, for traction?6,480 kg (14,286 lb)Traktorenlexikon, “Fiat 1880 DT”7,500 kg (16,535 lb)Traktorenlexikon, “White 4-175”Ahead (a fact, not an advantage)The WHITE 4-175 is 16% heavier (1,020 kg / 2,249 lb) than the Fiat 1880 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?10,000 kg (22,046 lb)Traktorenlexikon, “Fiat 1880 DT”No figureNo call on maximum permissible mass: no figure on record for the 4-175.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Fiat 1880 DT”18Traktorenlexikon, “White 4-175”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 1880 (DT) and the 4-175.
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 1880 DT”30 km/h (18.6 mph)Traktorenlexikon, “White 4-175”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 1880 DT”1000 rpmTraktorenlexikon, “White 4-175”AheadThe Fiat 1880 (DT) offers 540 rpm at the PTO, which the WHITE 4-175 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 1880 DT”No figureNo call on PTO independence: not stated for the 4-175.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 1880 DT”4WDTraktorenlexikon, “White 4-175”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1979–19841979–1983EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The WHITE 4-175 has 49% more hydraulic flow (27.5 L/min / 7.3 gpm) than the Fiat 1880 (DT) (both pump flow, as stated by the source).
  • The WHITE 4-175 is 16% heavier (1,020 kg / 2,249 lb) than the Fiat 1880 (DT) (both unladen weight, as stated by the source).
  • The Fiat 1880 (DT) offers 540 rpm at the PTO, which the WHITE 4-175 does not (as stated by the sources).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 1880 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4-175 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 1880 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 1880 DT”); the 4-175: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “White 4-175”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources