Fiat 1880 (DT) or WHITE 2-180?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 1880 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2-180 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The WHITE 2-180 suits loader and hydraulic implement work better on this data: 49% (27.5 L/min / 7.3 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 1880 (DT) and WHITE 2-180, with the call on each
Question1880 (DT)2-180Call
Which puts more power through the PTO shaft?132.5 kW (177.7 hp)Traktorenlexikon, “Fiat 1880 DT”133.9 kW (179.6 hp)Traktorenlexikon, “White 2-180”Not comparableNot comparable on power at the PTO shaft: the 1880 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2-180 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 1880 (DT) and the 2-180.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 1880 (DT) and the 2-180.
Which pumps more oil for implements?55.8 L/min (14.7 gpm)Traktorenlexikon, “Fiat 1880 DT”83.3 L/min (22.0 gpm)Traktorenlexikon, “White 2-180”AheadThe WHITE 2-180 has 49% more hydraulic flow (27.5 L/min / 7.3 gpm) than the Fiat 1880 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,900 kg (13,007 lb)Traktorenlexikon, “Fiat 1880 DT”2,903 kg (6,400 lb)Traktorenlexikon, “White 2-180”Not comparableNot comparable on three-point lift: the 1880 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 1880 DT”); the 2-180: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “White 2-180”) — not the same quantity, basis and condition.
Which is heavier, for traction?6,480 kg (14,286 lb)Traktorenlexikon, “Fiat 1880 DT”8,292 kg (18,281 lb)Traktorenlexikon, “White 2-180”Ahead (a fact, not an advantage)The WHITE 2-180 is 28% heavier (1,812 kg / 3,995 lb) than the Fiat 1880 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?10,000 kg (22,046 lb)Traktorenlexikon, “Fiat 1880 DT”No figureNo call on maximum permissible mass: no figure on record for the 2-180.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Fiat 1880 DT”18Traktorenlexikon, “White 2-180”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 1880 (DT) and the 2-180.
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 1880 DT”30 km/h (18.6 mph)Traktorenlexikon, “White 2-180”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 1880 DT”1000 rpmTraktorenlexikon, “White 2-180”AheadThe Fiat 1880 (DT) offers 540 rpm at the PTO, which the WHITE 2-180 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 1880 DT”independentTraktorenlexikon, “White 2-180”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 1880 DT”Two-wheel or four-wheel driveTraktorenlexikon, “White 2-180”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1979–19841978–1982EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The WHITE 2-180 has 49% more hydraulic flow (27.5 L/min / 7.3 gpm) than the Fiat 1880 (DT) (both pump flow, as stated by the source).
  • The WHITE 2-180 is 28% heavier (1,812 kg / 3,995 lb) than the Fiat 1880 (DT) (both unladen weight, as stated by the source).
  • The Fiat 1880 (DT) offers 540 rpm at the PTO, which the WHITE 2-180 does not (as stated by the sources).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 1880 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2-180 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 1880 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 1880 DT”); the 2-180: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “White 2-180”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources