Fiat 180-90 (DT) vs Steyr-Case 9200 a

11 material differences · fewer than 12

Tractor one

1984–1994

No measured PTO figure

Tractor two

1997–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 180-90 (DT) and the 9200 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 180-90 (DT) and Steyr-Case 9200 a, field by field
Field	180-90 (DT)	9200 a	Gap
Engine
Engine power, claimed claimed	177.7 hp	187.5 hp	+6% 9200 a
Engine declared	FIAT-IVECO 8365.25.502	CASE-IH 6T-830	differs
Displacement declared	8.10 L	8.27 L	—
Maximum torque declared	459 lb·ft · 622 N·m	583 lb·ft · 790 N·m	+27% 9200 a
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	Pedal operated hydraulic wet CASE-IH multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	30.4 gpm · 115.1 L/min	+127% 9200 a
Pressure declared	3,046–3,118 psi · 210–215 bar	2,944 psi · 203 bar	differs
Three-point lift at ends declared	14,551 lb · 6,600 kg	10,626 lb · 4,820 kg	+37% 180-90 (DT)
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,955 lb · 6,330 kg	17,419 lb · 7,901 kg	+25% 9200 a
Maximum permissible mass declared	22,046 lb · 10,000 kg	—	—
Wheelbase declared	116.7 in · 2,963 mm	118.3 in · 3,006 mm	—
Length declared	189.8 in · 4,820 mm	198.8 in · 5,049 mm	—
Width declared	80.7 in · 2,050 mm	112.0 in · 2,845 mm	+39% 9200 a
Height declared	115.4 in · 2,930 mm	118.8 in · 3,017 mm	—
Ground clearance declared	27.4 in · 695 mm	17.3 in · 439 mm	+58% 180-90 (DT)
Turning radius, braked declared	13.2 ft · 4.03 m	—	—
Fuel tank declared	190.2 qt · 180.0 L	379.4 qt · 359.0 L	+99% 9200 a

Source

Source