Fiat 180-90 (DT) vs Ford TW-30 (A)

10 material differences · fewer than 12

Tractor one

1984–1994

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 180-90 (DT) and the TW-30 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Fiat 180-90 (DT) and Ford TW-30 (A), field by field
Field	180-90 (DT)	TW-30 (A)	Gap
Engine
Engine power, claimed claimed	177.7 hp	174.6 hp	—
Engine declared	FIAT-IVECO 8365.25.502	Ford 401 DF-TI	differs
Displacement declared	8.10 L	6.58 L	+23% 180-90 (DT)
Maximum torque declared	459 lb·ft · 622 N·m	494 lb·ft · 670 N·m	+8% TW-30 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	—	—
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	14,551 lb · 6,600 kg	9,722 lb · 4,410 kg	+50% 180-90 (DT)
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	13,955 lb · 6,330 kg	14,625 lb · 6,634 kg	—
Maximum permissible mass declared	22,046 lb · 10,000 kg	19,820 lb · 8,990 kg	+11% 180-90 (DT)
Wheelbase declared	116.7 in · 2,963 mm	110.5 in · 2,807 mm	+6% 180-90 (DT)
Length declared	189.8 in · 4,820 mm	190.9 in · 4,849 mm	—
Width declared	80.7 in · 2,050 mm	83.6 in · 2,124 mm	—
Height declared	115.4 in · 2,930 mm	116.0 in · 2,946 mm	—
Ground clearance declared	27.4 in · 695 mm	25.2 in · 640 mm	+9% 180-90 (DT)
Turning radius, braked declared	13.2 ft · 4.03 m	13.3 ft · 4.06 m	—
Fuel tank declared	190.2 qt · 180.0 L	299.9 qt · 283.8 L	+58% TW-30 (A)

Source

Source