Fiat 160-90 (DT) vs VALMET 8400

12 material differences

Tractor one

1984–1994

No measured PTO figure

Tractor two

1993–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 160-90 (DT) and the 8400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 160-90 (DT) and VALMET 8400, field by field
Field	160-90 (DT)	8400	Gap
Engine
Engine power, claimed claimed	158.0 hp	138.1 hp	+14% 160-90 (DT)
Engine declared	FIAT-IVECO 8365.25.503	Valmet 620 DS	differs
Displacement declared	8.10 L	6.60 L	+23% 160-90 (DT)
Maximum torque declared	394 lb·ft · 534 N·m	384 lb·ft · 520 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	Pedal operated dry Fichtel & Sachs single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	19.3 gpm · 73.2 L/min	+44% 8400
Pressure declared	3,046–3,118 psi · 210–215 bar	2,031–2,248 psi · 140–155 bar	differs
Three-point lift at ends declared	5,512 lb · 2,500 kg	15,576 lb · 7,065 kg	+183% 8400
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,647 lb · 6,190 kg	11,111 lb · 5,040 kg	+23% 160-90 (DT)
Maximum permissible mass declared	22,046 lb · 10,000 kg	19,842 lb · 9,000 kg	+11% 160-90 (DT)
Wheelbase declared	116.7 in · 2,963 mm	100.7 in · 2,558 mm	+16% 160-90 (DT)
Length declared	189.8 in · 4,820 mm	190.7 in · 4,844 mm	—
Width declared	80.7 in · 2,050 mm	90.5 in · 2,298 mm	+12% 8400
Height declared	112.2 in · 2,850 mm	109.8 in · 2,790 mm	—
Ground clearance declared	27.4 in · 695 mm	20.1 in · 510 mm	+36% 160-90 (DT)
Turning radius, braked declared	13.1 ft · 4.00 m	—	—
Fuel tank declared	190.2 qt · 180.0 L	174.4 qt · 165.0 L	+9% 160-90 (DT)

Source

Source