11 material differences · fewer than 12

Tractor oneFiat 160-90 (DT)1984–1994No measured PTO figureTractor twoSteyr 9160 a1995–1997No measured PTO figure

Which should you choose?

Read our verdict on the 160-90 (DT) and the 9160 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 160-90 (DT) and Steyr 9160 a, field by field
Field	160-90 (DT)	9160 a	Gap
Engine
Engine power, claimed claimed	158.0 hp	158.0 hp	—
Engine declared	FIAT-IVECO 8365.25.503	Steyr-VALMET WD 620 DS	differs
Displacement declared	8.10 L	6.60 L	+23% 160-90 (DT)
Maximum torque declared	394 lb·ft · 534 N·m	491 lb·ft · 666 N·m	+25% 9160 a
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	Pedal operated dry single-plate clutch as driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	—	—
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,647 lb · 6,190 kg	13,338 lb · 6,050 kg	—
Maximum permissible mass declared	22,046 lb · 10,000 kg	24,251 lb · 11,000 kg	+10% 9160 a
Wheelbase declared	116.7 in · 2,963 mm	115.2 in · 2,925 mm	—
Length declared	189.8 in · 4,820 mm	203.3 in · 5,165 mm	+7% 9160 a
Width declared	80.7–108.3 in · 2,050–2,750 mm	96.5 in · 2,450 mm	differs
Height, over the cab declared	112.2 in · 2,850 mm	119.3 in · 3,030 mm	+6% 9160 a
Ground clearance declared	27.4 in · 695 mm	19.7 in · 500 mm	+39% 160-90 (DT)
Turning radius, braked declared	13.1 ft · 4.00 m	—	—
Fuel tank declared	190.2 qt · 180.0 L	285.3 qt · 270.0 L	+50% 9160 a

Source

Source