Fiat 160-90 (DT) vs Steyr 8180 a

13 material differences

Tractor one

1984–1994

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 160-90 (DT) and the 8180 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 160-90 (DT) and Steyr 8180 a, field by field
Field	160-90 (DT)	8180 a	Gap
Engine
Engine power, claimed claimed	158.0 hp	158.0 hp	—
Engine declared	FIAT-IVECO 8365.25.503	Steyr WD 612.96	differs
Displacement declared	8.10 L	6.60 L	+23% 160-90 (DT)
Maximum torque declared	394 lb·ft · 534 N·m	466 lb·ft · 632 N·m	+18% 8180 a
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	13.8 gpm · 52.4 L/min	—
Pressure declared	3,046–3,118 psi · 210–215 bar	3,553 psi · 245 bar	differs
Three-point lift at ends declared	5,512 lb · 2,500 kg	14,595 lb · 6,620 kg	+165% 8180 a
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,647 lb · 6,190 kg	13,254 lb · 6,012 kg	—
Maximum permissible mass declared	22,046 lb · 10,000 kg	18,739 lb · 8,500 kg	+18% 160-90 (DT)
Wheelbase declared	116.7 in · 2,963 mm	106.3 in · 2,700 mm	+10% 160-90 (DT)
Length declared	189.8 in · 4,820 mm	201.8 in · 5,125 mm	+6% 8180 a
Width declared	80.7 in · 2,050 mm	97.2 in · 2,470 mm	+20% 8180 a
Height declared	112.2 in · 2,850 mm	113.4 in · 2,880 mm	—
Ground clearance declared	27.4 in · 695 mm	19.9 in · 505 mm	+38% 160-90 (DT)
Turning radius, braked declared	13.1 ft · 4.00 m	16.3 ft · 4.97 m	+24% 8180 a
Fuel tank declared	190.2 qt · 180.0 L	253.6 qt · 240.0 L	+33% 8180 a

Source

Source