Fiat 160-90 (DT) vs Steyr 8170 a

12 material differences

Tractor one

1984–1994

No measured PTO figure

Tractor two

1980–1986

No measured PTO figure

Which should you choose?

Read our verdict on the 160-90 (DT) and the 8170 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 160-90 (DT) and Steyr 8170 a, field by field
Field	160-90 (DT)	8170 a	Gap
Engine
Engine power, claimed claimed	158.0 hp	148.0 hp	+7% 160-90 (DT)
Engine declared	FIAT-IVECO 8365.25.503	Steyr WD 612.89	differs
Displacement declared	8.10 L	6.60 L	+23% 160-90 (DT)
Maximum torque declared	394 lb·ft · 534 N·m	451 lb·ft · 612 N·m	+15% 8170 a
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	11.1 gpm · 42.0 L/min	+21% 160-90 (DT)
Pressure declared	3,046–3,118 psi · 210–215 bar	3,553 psi · 245 bar	differs
Three-point lift at ends declared	5,512 lb · 2,500 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,647 lb · 6,190 kg	13,281 lb · 6,024 kg	—
Maximum permissible mass declared	22,046 lb · 10,000 kg	17,637 lb · 8,000 kg	+25% 160-90 (DT)
Wheelbase declared	116.7 in · 2,963 mm	106.3 in · 2,700 mm	+10% 160-90 (DT)
Length declared	189.8 in · 4,820 mm	196.1 in · 4,980 mm	—
Width declared	80.7 in · 2,050 mm	92.1 in · 2,340 mm	+14% 8170 a
Height declared	112.2 in · 2,850 mm	108.3 in · 2,750 mm	—
Ground clearance declared	27.4 in · 695 mm	18.9 in · 480 mm	+45% 160-90 (DT)
Turning radius, braked declared	13.1 ft · 4.00 m	16.2 ft · 4.95 m	+24% 8170 a
Fuel tank declared	190.2 qt · 180.0 L	253.6 qt · 240.0 L	+33% 8170 a

Source

Source