Fiat 160-90 (DT) or Massey Ferguson MF 8140 A?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 160-90 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8140 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson 8140A suits loader and hydraulic implement work better on this data: 126% (3,140 kg / 6,923 lb) more three-point lift.
  • The Massey Ferguson 8140A suits road haulage better on this data: 15% (1,500 kg / 3,307 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 160-90 (DT) and Massey Ferguson MF 8140 A, with the call on each
Question160-90 (DT)MF 8140 ACall
Which puts more power through the PTO shaft?117.8 kW (158.0 hp)Traktorenlexikon, “Fiatagri 160-90 DT”117.8 kW (158.0 hp)Traktorenlexikon, “Massey Ferguson MF 8140”Not comparableNot comparable on power at the PTO shaft: the 160-90 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8140 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 160-90 (DT) and the MF 8140 A.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 160-90 (DT) and the MF 8140 A.
Which pumps more oil for implements?50.8 L/min (13.4 gpm)Traktorenlexikon, “Fiatagri 160-90 DT”53.3 L/min (14.1 gpm)Traktorenlexikon, “Massey Ferguson MF 8140”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?2,500 kg (5,512 lb)Traktorenlexikon, “Fiatagri 160-90 DT”5,640 kg (12,434 lb)Traktorenlexikon, “Massey Ferguson MF 8140”AheadThe Massey Ferguson 8140A has 126% more lift (3,140 kg / 6,923 lb) than the Fiat 160-90 (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?6,190 kg (13,647 lb)Traktorenlexikon, “Fiatagri 160-90 DT”6,115 kg (13,481 lb)Traktorenlexikon, “Massey Ferguson MF 8140”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?10,000 kg (22,046 lb)Traktorenlexikon, “Fiatagri 160-90 DT”11,500 kg (25,353 lb)Traktorenlexikon, “Massey Ferguson MF 8140”AheadThe Massey Ferguson 8140A has 15% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fiat 160-90 (DT) (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?16 to 24Traktorenlexikon, “Fiatagri 160-90 DT”32 to 48Traktorenlexikon, “Massey Ferguson MF 8140”AheadThe Massey Ferguson 8140A has 33% more forward gears (8 gears) than the Fiat 160-90 (DT) (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 160-90 (DT) and the MF 8140 A.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri 160-90 DT”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 8140”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiatagri 160-90 DT”540/540E/1000 rpmTraktorenlexikon, “Massey Ferguson MF 8140”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri 160-90 DT”independentTraktorenlexikon, “Massey Ferguson MF 8140”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 160-90 DT”Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 8140”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1984–19941995–1999Ahead (a fact, not an advantage)The Massey Ferguson 8140A is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 8140A has 126% more lift (3,140 kg / 6,923 lb) than the Fiat 160-90 (DT) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson 8140A has 15% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fiat 160-90 (DT) (both maximum permissible mass, as stated by the source).
  • The Massey Ferguson 8140A has 33% more forward gears (8 gears) than the Fiat 160-90 (DT) (both forward gears, as stated by the source).
  • The Massey Ferguson 8140A is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 160-90 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8140 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources