Fiat 160-90 (DT) vs International Harvester 4156

12 material differences

Tractor one

1984–1994

No measured PTO figure

Tractor two

1969–1970

No measured PTO figure

Which should you choose?

Read our verdict on the 160-90 (DT) and the 4156 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 1 fields identical or within 5%, which is not counted as material

Fiat 160-90 (DT) and International Harvester 4156, field by field
Field	160-90 (DT)	4156	Gap
Engine
Engine power, claimed claimed	158.0 hp	138 hp	+14% 160-90 (DT)
Engine declared	FIAT-IVECO 8365.25.503	INTERNATIONAL HARVESTER DT-429	differs
Displacement declared	8.10 L	7.04 L	+15% 160-90 (DT)
Maximum torque declared	394 lb·ft · 534 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	Pedal operated dry single plate clutch type 14 inches	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	16.5 gpm · 62.5 L/min	+23% 4156
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	5,512 lb · 2,500 kg	—	—
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,647 lb · 6,190 kg	15,174 lb · 6,883 kg	+11% 4156
Maximum permissible mass declared	22,046 lb · 10,000 kg	—	—
Wheelbase declared	116.7 in · 2,963 mm	102.0 in · 2,590 mm	+14% 160-90 (DT)
Length declared	189.8 in · 4,820 mm	194.0 in · 4,928 mm	—
Width declared	80.7 in · 2,050 mm	95.7 in · 2,430 mm	+19% 4156
Height declared	112.2 in · 2,850 mm	139.8 in · 3,550 mm	+25% 4156
Ground clearance declared	27.4 in · 695 mm	17.3 in · 440 mm	+58% 160-90 (DT)
Turning radius, braked declared	13.1 ft · 4.00 m	—	—
Fuel tank declared	190.2 qt · 180.0 L	400.0 qt · 378.5 L	+110% 4156

Source

Source