Fiat 160-90 (DT) vs International Harvester Farmall 1468
13 material differences
Which should you choose?
We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 2WD); they were not built in overlapping years (1984–1994; 1971–1974). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 160-90 (DT) | Farmall 1468 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 158.0 hp | 146.0 hp | +8% 160-90 (DT) |
| Engine declared | FIAT-IVECO 8365.25.503 | INTERNATIONAL HARVESTER DV-8/550 | differs |
| Displacement declared | 8.10 L | 8.99 L | +11% Farmall 1468 |
| Maximum torque declared | 394 lb·ft · 534 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 21.7 mph · 35 km/h | differs |
| Clutch declared | Pedal-operated hydraulic dry LUK double clutch | Pedal operated ceramic clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 13.4 gpm · 50.8 L/min | 12.0 gpm · 45.5 L/min | +12% 160-90 (DT) |
| Pressure declared | 3,046–3,118 psi · 210–215 bar | — | — |
| Three-point lift at ends declared | 5,512 lb · 2,500 kg | 5,798 lb · 2,630 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 13,647 lb · 6,190 kg | 13,459 lb · 6,105 kg | — |
| Maximum permissible mass declared | 22,046 lb · 10,000 kg | — | — |
| Wheelbase declared | 116.7 in · 2,963 mm | 104.8 in · 2,662 mm | +11% 160-90 (DT) |
| Length declared | 189.8 in · 4,820 mm | 168.0 in · 4,267 mm | +13% 160-90 (DT) |
| Width declared | 80.7 in · 2,050 mm | 98.0 in · 2,489 mm | +21% Farmall 1468 |
| Height declared | 112.2 in · 2,850 mm | 126.0 in · 3,200 mm | +12% Farmall 1468 |
| Ground clearance declared | 27.4 in · 695 mm | 16.0 in · 406 mm | +71% 160-90 (DT) |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 11.7 ft · 3.56 m | +12% 160-90 (DT) |
| Fuel tank declared | 190.2 qt · 180.0 L | 168.0 qt · 159.0 L | +13% 160-90 (DT) |
Fiat 160-90 (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri 160-90 DT”
International Harvester Farmall 1468 sources
Source
- Source: Traktorenlexikon, “Farmall Farmall 1468”
- Source: Traktorenlexikon, “IHC 1568”
- Source: Traktorenlexikon, “IHC 1468”