Fiat 160-90 (DT) vs Hürlimann H-6160 A

11 material differences · fewer than 12

Tractor one

1984–1994

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 160-90 (DT) and the H-6160 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 160-90 (DT) and Hürlimann H-6160 A, field by field
Field	160-90 (DT)	H-6160 A	Gap
Engine
Engine power, claimed claimed	158.0 hp	155.7 hp	—
Engine declared	FIAT-IVECO 8365.25.503	Hürlimann H-1106/15-Turbo	differs
Displacement declared	8.10 L	6.84 L	+18% 160-90 (DT)
Maximum torque declared	394 lb·ft · 534 N·m	471 lb·ft · 638 N·m	+19% H-6160 A
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	15.3 gpm · 58.0 L/min	+14% H-6160 A
Pressure declared	3,046–3,118 psi · 210–215 bar	2,277 psi · 157 bar	differs
Three-point lift at ends declared	5,512 lb · 2,500 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,647 lb · 6,190 kg	14,220 lb · 6,450 kg	—
Maximum permissible mass declared	22,046 lb · 10,000 kg	20,503 lb · 9,300 kg	+8% 160-90 (DT)
Wheelbase declared	116.7 in · 2,963 mm	112.5 in · 2,857 mm	—
Length declared	189.8 in · 4,820 mm	175.2 in · 4,450 mm	+8% 160-90 (DT)
Width declared	80.7 in · 2,050 mm	92.5 in · 2,350 mm	+15% H-6160 A
Height declared	112.2 in · 2,850 mm	115.0 in · 2,920 mm	—
Ground clearance declared	27.4 in · 695 mm	19.3 in · 490 mm	+42% 160-90 (DT)
Turning radius, braked declared	13.1 ft · 4.00 m	—	—
Fuel tank declared	190.2 qt · 180.0 L	253.6 qt · 240.0 L	+33% H-6160 A

Source

Source