Fiat 1380 (DT) vs J.I. Case 1170

10 material differences · fewer than 12

Tractor one

1979–1984

No measured PTO figure

Tractor two

1970–1972

No measured PTO figure

Which should you choose?

Read our verdict on the 1380 (DT) and the 1170 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 1380 (DT) and J.I. Case 1170, field by field
Field	1380 (DT)	1170	Gap
Engine
Engine power, claimed claimed	133.3 hp	121.9 hp	+9% 1380 (DT)
Engine declared	FIAT-IVECO 8065.24.000	CASE A-451 T	differs
Displacement declared	5.50 L	7.39 L	+34% 1170
Maximum torque declared	317 lb·ft · 430 N·m	384 lb·ft · 520 N·m	+21% 1170
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5–18.6 mph · 25–30 km/h	—
Hydraulics & hitch
Pump flow declared	14.1 gpm · 53.5 L/min	16.0 gpm · 60.6 L/min	+13% 1170
Pressure declared	3,336–3,481 psi · 230–240 bar	—	—
Three-point lift at ends declared	10,878 lb · 4,934 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,748 lb · 4,875 kg	13,541 lb · 6,142 kg	+26% 1170
Maximum permissible mass declared	19,070 lb · 8,650 kg	—	—
Wheelbase declared	108.3 in · 2,750 mm	108.0 in · 2,743 mm	—
Length declared	162.8 in · 4,135 mm	172.0 in · 4,370 mm	+6% 1170
Width declared	78.0 in · 1,980 mm	88.0 in · 2,235 mm	+13% 1170
Height declared	108.5 in · 2,755 mm	116.1 in · 2,950 mm	+7% 1170
Ground clearance declared	26.2 in · 665 mm	22.2 in · 565 mm	+18% 1380 (DT)
Turning radius, braked declared	13.9 ft · 4.25 m	12.8 ft · 3.91 m	+9% 1380 (DT)
Fuel tank declared	190.2 qt · 180.0 L	200.0 qt · 189.3 L	—

Source

Source