Fiat 1300 Super (DT) vs International Harvester 1086

10 material differences · fewer than 12

Tractor one

Fiat 1300 Super (DT)

1976–1979

No measured PTO figure

Tractor two

International Harvester 1086

1976–1979

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (27%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 1300 Super (DT) and International Harvester 1086, field by field
Field1300 Super (DT)1086Gap
Engine
Engine power, claimed claimed148.0 hp131.2 hp+13% 1300 Super (DT)
Engine declaredOM CP 3-100/Var. 17/300INTERNATIONAL HARVESTER DT-414differs
Displacement declared7.41 L6.78 L+9% 1300 Super (DT)
Maximum torque declared363 lb·ft · 492 N·m391 lb·ft · 530 N·m+8% 1086
Transmission
Top speed declared15.5 mph · 25 km/h18.6 mph · 30 km/h+20% 1086
Clutch declareddry Ferodo single-plate clutch
Hydraulics & hitch
Pump flow declared12.0 gpm · 45.5 L/min12.0 gpm · 45.4 L/min
Three-point lift at ends declared13,007 lb · 5,900 kg7,352 lb · 3,335 kg+77% 1300 Super (DT)
Rear PTO speeds declared540/1000 rpm540/1000 rpm
Weight & dimensions
Unladen weight declared9,987 lb · 4,530 kg12,725 lb · 5,772 kg+27% 1086
Wheelbase declared108.3 in · 2,750 mm104.8 in · 2,662 mm
Length declared175.2 in · 4,450 mm168.0 in · 4,267 mm
Width declared85.0 in · 2,160 mm102.0 in · 2,591 mm+20% 1086
Height declared112.2 in · 2,850 mm115.0 in · 2,921 mm
Ground clearance declared15.7 in · 400 mm13.0 in · 330 mm+21% 1300 Super (DT)
Turning radius, braked declared14.4 ft · 4.40 m11.6 ft · 3.53 m+25% 1300 Super (DT)
Fuel tank declared211.3 qt · 200.0 L252.0 qt · 238.5 L+19% 1086

Fiat 1300 Super (DT) sources

Source
  • Source: Traktorenlexikon, “Fiat 1300 DT Super”

International Harvester 1086 sources

Source
  • Source: Traktorenlexikon, “IHC 1086”
  • Source: Traktorenlexikon, “IHC 1066”