0 material differences · fewer than 12
Tractor oneFiat 1300 (DT)1974–1977No measured PTO figureTractor twoSOMECA 1300 (TD)1974–1977No measured PTO figure
Which should you choose?
Read our verdict on the 1300 (DT) and the 1300 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
0 material differences · 16 fields identical or within 5%, which is not counted as material
| Field | 1300 (DT) | 1300 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 128.2 hp | 128.2 hp | — |
| Engine declared | O.M.-FIAT CP-3/100 Var.16 | O.M.-FIAT CP-3/100 Var.16 | — |
| Displacement declared | 7.41 L | 7.41 L | — |
| Maximum torque declared | 356 lb·ft · 482 N·m | 356 lb·ft · 482 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Pedal operated dry FERODO single disc clutch 14 inch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.6 gpm · 47.7 L/min | 12.6 gpm · 47.7 L/min | — |
| Pressure declared | 2,901–3,336 psi · 200–230 bar | 2,901–3,336 psi · 200–230 bar | — |
| Three-point lift, at the coupling ends declared | 7,275 lb · 3,300 kg | 7,275 lb · 3,300 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,456 lb · 5,650 kg | 12,456 lb · 5,650 kg | — |
| Wheelbase declared | 108.3 in · 2,750 mm | 108.3 in · 2,750 mm | — |
| Length declared | 180.3 in · 4,580 mm | 175.6 in · 4,460 mm | — |
| Width declared | 85.4–109.1 in · 2,170–2,770 mm | 85.4–109.1 in · 2,170–2,770 mm | — |
| Ground clearance declared | 25.0 in · 635 mm | 25.0 in · 635 mm | — |
| Turning radius, braked declared | 14.4 ft · 4.40 m | 14.4 ft · 4.40 m | — |
| Fuel tank declared | 216.6 qt · 205.0 L | 216.6 qt · 205.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 1300 (DT) sources
- Source: Traktorenlexikon, “Fiat 1300/1300 DT”
- Source: Traktorenlexikon, “Someca 1300”
SOMECA 1300 (TD) sources
- Source: Traktorenlexikon, “Someca 1300”