13 material differences
Tractor oneFiat 1300 (DT)1974–1977No measured PTO figureTractor twoInternational Harvester 12461972–1979No measured PTO figure
Which should you choose?
Read our verdict on the 1300 (DT) and the 1246 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | 1300 (DT) | 1246 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 128.2 hp | 117.7 hp | +9% 1300 (DT) |
| Engine declared | O.M.-FIAT CP-3/100 Var.16 | IHC DT-358 | differs |
| Displacement declared | 7.41 L | 5.87 L | +26% 1300 (DT) |
| Maximum torque declared | 356 lb·ft · 482 N·m | 328 lb·ft · 444 N·m | +9% 1300 (DT) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 19.9 mph · 32 km/h | +28% 1246 |
| Hydraulics & hitch | |||
| Pump flow declared | 12.6 gpm · 47.7 L/min | 10.6 gpm · 40.0 L/min | +19% 1300 (DT) |
| Pressure declared | 2,901–3,336 psi · 200–230 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,456 lb · 5,650 kg | 9,811 lb · 4,450 kg | +27% 1300 (DT) |
| Wheelbase declared | 108.3 in · 2,750 mm | 100.8–102.0 in · 2,560–2,590 mm | differs |
| Length declared | 180.3 in · 4,580 mm | 165.4–167.7 in · 4,200–4,260 mm | differs |
| Width declared | 85.4–109.1 in · 2,170–2,770 mm | 82.2–83.1 in · 2,088–2,111 mm | differs |
| Ground clearance declared | 25.0 in · 635 mm | 20.4 in · 517 mm | +23% 1300 (DT) |
| Turning radius, braked declared | 14.4 ft · 4.40 m | 17.6 ft · 5.35 m | +22% 1246 |
| Fuel tank declared | 216.6 qt · 205.0 L | 116.2 qt · 110 L | +86% 1300 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 1300 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 1300/1300 DT”
- Source: Traktorenlexikon, “Someca 1300”
International Harvester 1246 sources
Source
- Source: Traktorenlexikon, “IHC 1246”