Fiat 115-90 (DT) vs SOMECA 1180 (TD)

8 material differences · fewer than 12

Tractor one

1984–1990

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 115-90 (DT) and the 1180 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Fiat 115-90 (DT) and SOMECA 1180 (TD), field by field
Field	115-90 (DT)	1180 (TD)	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.5 hp	—
Engine declared	FIAT-IVECO 8065.05.000	FIAT-IVECO 8065.04.217 (317)	differs
Displacement declared	5.86 L	5.50 L	+7% 115-90 (DT)
Maximum torque declared	260 lb·ft · 353 N·m	288 lb·ft · 390 N·m	+10% 1180 (TD)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Dry Valeo or LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	14.7 gpm · 55.6 L/min	12.7 gpm · 48.2 L/min	+15% 115-90 (DT)
Pressure declared	3,046–3,118 psi · 210–215 bar	3,263–3,408 psi · 225–235 bar	differs
Three-point lift at ends declared	—	10,384 lb · 4,710 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,097 lb · 4,580 kg	10,311 lb · 4,677 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	108.3 in · 2,750 mm	108.3 in · 2,750 mm	—
Length declared	180.3 in · 4,580 mm	161.2 in · 4,095 mm	+12% 115-90 (DT)
Width declared	74.8 in · 1,900 mm	78.7 in · 2,000 mm	+5% 1180 (TD)
Height declared	108.1 in · 2,745 mm	108.1 in · 2,745 mm	—
Ground clearance declared	26.4 in · 670 mm	26.0 in · 660 mm	—
Turning radius, braked declared	12.7 ft · 3.87 m	12.7 ft · 3.88 m	—
Fuel tank declared	190.2 qt · 180.0 L	190.2 qt · 180.0 L	—

Source

Source