11 material differences · fewer than 12
Tractor oneFiat 115-90 (DT)1984–1990No measured PTO figureTractor twoSAME Buffalo 120 (DT)1974–1977No measured PTO figure
Which should you choose?
Read our verdict on the 115-90 (DT) and the Buffalo 120 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 115-90 (DT) | Buffalo 120 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 113.5 hp | 113.5 hp | — |
| Engine declared | FIAT-IVECO 8065.05.000 | SAME DA 040-1056 | differs |
| Displacement declared | 5.86 L | 6.24 L | +6% Buffalo 120 (DT) |
| Maximum torque declared | 260 lb·ft · 353 N·m | 308 lb·ft · 417 N·m | +18% Buffalo 120 (DT) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Dry Valeo or LuK double clutch | Pedal operated dry Borg & Beck single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 14.7 gpm · 55.6 L/min | 7.9 gpm · 30.0 L/min | +85% 115-90 (DT) |
| Pressure declared | 3,046–3,118 psi · 210–215 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,097 lb · 4,580 kg | 9,700 lb · 4,400 kg | — |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | — | — |
| Wheelbase declared | 108.3 in · 2,750 mm | 104.7 in · 2,660 mm | — |
| Length declared | 180.3 in · 4,580 mm | 156.7 in · 3,980 mm | +15% 115-90 (DT) |
| Width declared | 74.8–105.9 in · 1,900–2,690 mm | 85.4–113.0 in · 2,170–2,870 mm | differs |
| Ground clearance declared | 26.4 in · 670 mm | 20.9 in · 530 mm | +26% 115-90 (DT) |
| Turning radius, braked declared | 12.7 ft · 3.87 m | 13.5 ft · 4.10 m | +6% Buffalo 120 (DT) |
| Fuel tank declared | 190.2 qt · 180.0 L | 132.1 qt · 125.0 L | +44% 115-90 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 115-90 (DT) sources
- Source: Traktorenlexikon, “Fiatagri 115-90 DT”
SAME Buffalo 120 (DT) sources
- Source: Traktorenlexikon, “SAME Buffalo 120”