Fiat 115-90 (DT) or Massey Ferguson MF 3115 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 115-90 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3115 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fiat 115-90 (DT) suits loader and hydraulic implement work better on this data: 11% (5.6 L/min / 1.5 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 115-90 (DT) and Massey Ferguson MF 3115 (A), with the call on each
Question115-90 (DT)MF 3115 (A)Call
Which puts more power through the PTO shaft?84.6 kW (113.5 hp)Traktorenlexikon, “Fiatagri 115-90 DT”84.6 kW (113.5 hp)Traktorenlexikon, “Massey Ferguson MF 3115”Not comparableNot comparable on power at the PTO shaft: the 115-90 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3115 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 115-90 (DT) and the MF 3115 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 115-90 (DT) and the MF 3115 (A).
Which pumps more oil for implements?55.6 L/min (14.7 gpm)Traktorenlexikon, “Fiatagri 115-90 DT”50.0 L/min (13.2 gpm)Traktorenlexikon, “Massey Ferguson MF 3115”AheadThe Fiat 115-90 (DT) has 11% more hydraulic flow (5.6 L/min / 1.5 gpm) than the Massey Ferguson MF 3115 (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,540 kg (12,214 lb)Traktorenlexikon, “Massey Ferguson MF 3115”No figureNo call on three-point lift: no figure on record for the 115-90 (DT).
Which is heavier, for traction?4,580 kg (10,097 lb)Traktorenlexikon, “Fiatagri 115-90 DT”4,530 kg (9,987 lb)Traktorenlexikon, “Massey Ferguson MF 3115”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Fiatagri 115-90 DT”8,000 kg (17,637 lb)Traktorenlexikon, “Massey Ferguson MF 3115”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Fiatagri 115-90 DT”16 to 32Traktorenlexikon, “Massey Ferguson MF 3115”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 115-90 (DT) and the MF 3115 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri 115-90 DT”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3115”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiatagri 115-90 DT”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3115”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri 115-90 DT”independentTraktorenlexikon, “Massey Ferguson MF 3115”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 115-90 DT”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3115”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1984–19901990–1993Ahead (a fact, not an advantage)The Massey Ferguson MF 3115 (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 115-90 (DT) has 11% more hydraulic flow (5.6 L/min / 1.5 gpm) than the Massey Ferguson MF 3115 (A) (both pump flow, as stated by the source).
  • The Massey Ferguson MF 3115 (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 115-90 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3115 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.

← Every figure for both machines, side by side, with sources