Fiat 110-90 (DT) vs Massey Ferguson MF 2645

11 material differences · fewer than 12

Tractor one

1986–2003

No measured PTO figure

Tractor two

1985–1986

No measured PTO figure

Which should you choose?

Read our verdict on the 110-90 (DT) and the MF 2645 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 110-90 (DT) and Massey Ferguson MF 2645, field by field
Field	110-90 (DT)	MF 2645	Gap
Engine
Engine power, claimed claimed	109 hp	109 hp	—
Engine declared	FIAT-IVECO 8065.05	Perkins A 6.354-4	differs
Displacement declared	5.86 L	5.80 L	—
Maximum torque declared	258 lb·ft · 350 N·m	271 lb·ft · 367 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Pump flow declared	15.1 gpm · 57.0 L/min	—	—
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	10,002 lb · 4,537 kg	13,889 lb · 6,300 kg	+39% MF 2645
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,436 lb · 4,280 kg	12,412 lb · 5,630 kg	+32% MF 2645
Maximum permissible mass declared	14,330 lb · 6,500 kg	16,535 lb · 7,500 kg	+15% MF 2645
Wheelbase declared	101.7 in · 2,584 mm	107.3 in · 2,726 mm	+5% MF 2645
Length declared	178.9 in · 4,544 mm	200.0 in · 5,080 mm	+12% MF 2645
Width declared	77.6 in · 1,970 mm	91.3 in · 2,320 mm	+18% MF 2645
Height declared	103.3 in · 2,625 mm	113.4 in · 2,880 mm	+10% MF 2645
Ground clearance declared	18.9 in · 481 mm	18.5 in · 470 mm	—
Turning radius, braked declared	12.5 ft · 3.82 m	16.1 ft · 4.90 m	+28% MF 2645
Fuel tank declared	140.5 qt · 133.0 L	225.1 qt · 213.0 L	+60% MF 2645

Source

Source